JVC HR-S7850EU VCR User Manual


 
Filename [HRS7850EU2.fm]
Masterpage:Left
30
EN
Page 30 April 19, 2001 3:29 pm
TIMER RECORDING
S
HOW
V
IEW
®
Timer
Programming
You can use the on-screen display to enter the S
HOW
V
IEW
number.
A
Access the S
HOW
V
IEW
screen.
The front display panel looks like this:
B
Enter the S
HOW
V
IEW
number.
The S
HOW
V
IEW
number you enter appears on the front display
panel with only a 4-digit number:
C
Access the S
HOW
V
IEW
Program screen.
The front display panel shows the programme start time. Pressing
"
changes the display to the programme stop time, then the
date and channel position.
If the number you entered is invalid, “ERROR” appears on the
TV screen and “Err” appears on the front display panel. Press
&
and input a valid S
HOW
V
IEW
number.
If the “GUIDE PROG SET” screen appears, see “ATTENTION”
on page 31.
Before performing the S
HOW
V
IEW
Timer
Programming:
Make sure that the recorder’s built-in clock is set properly.
Insert a cassette with the safety tab in place. The recorder
will come on automatically.
Turn on the TV and select the video channel (or AV mode).
Press
PROG
.
Press the
number keys
to
enter the S
HOW
V
IEW
number
of a programme you wish to
record. Then press
OK
.
If you make a mistake, press &
and input the correct number.
The S
HOW
V
IEW
Program
screen appears (if you’re just
starting out, “P1” appears).
IMPORTANT
Make sure the channel position number you wish to record is
displayed; if not, see “S
HOW
V
IEW
®
System Setup” on page 59
and set the Guide Program number correctly.
HRS7850EU2.fm Page 30 Thursday, April 19, 2001 3:29 PM