JVC HR-S7850EU VCR User Manual


 
Masterpage:Right-NoTitle0
EN
51
Filename [HRS7850EU3.fm]
Page 51 April 13, 2001 2:57 pm
Perfect Connections
This is an example of recommended connection if your
TV has two 21-pin AV input (SCART) connectors.
Connect the decoder to the satellite receiver’s connector
if you have a decoder, AV1 (L-1) IN/OUT connector to
TV’s connector, and AV2 (L-2) IN/DECODER connector
to the satellite receiver’s connector. Then connect the
satellite receiver and TV.
NOTES:
Set “L-2 SELECT” to “A/V” (
pg. 45).
You can use Automatic Satellite Programme Recording
function (
pg. 37) with this connection.
To record a programme via the satellite receiver, select L-2
mode by pressing
AUX
(
number key
0
”) and/or
PR
so that
“L-2” appears on the front display panel.
To receive a scrambled broadcast, descramble the signal with
the satellite receiver.
For details, refer to the instruction manual of the satellite
receiver and decoder.
Outdoor unit
Satellite cable
Satellite receiver
Aerial
TV aerial cable
21-pin SCART
connector
Back of TV
ANT. IN
RF OUT
Aerial
connector
Decoder
Mains outlet
Back of recorder
HRS7850EU3.fm Page 51 Friday, April 13, 2001 3:02 PM