Filter
Top Products
advanced features44
Direct Rec
You can start recording the programme that you are watching on your TV with
simple operation. Press and hold T and press . on the Remote Control, or press
T on the VCR. Follow the procedure below to use this function.
get to the mode set screen Press m. Move the highlight bar to MODE
SET
using the A and B buttons and press
OK
3
/
(or E).
select direct rec mode Move the highlight
bar to
DIRECT REC using the A and B
buttons. Press
OK
3
/
(or E) to select ON or
OFF.
return to normal screen Press m.
NOTES
• When DIRECT REC is set to ON, if you press
any button just after pressing Ton the VCR
(or Tand . on the Remote Control), the
recorder may not function properly.
• If
DIRECT REC is set to OFF, the T button functions as described in Recording
(੬ pg. 20).
• During the Direct Rec, ‘– –’ appears on the display panel.
• Direct Rec is not possible with a scrambled broadcast. To record a scrambled
broadcast, set
DIRECT REC to OFF and follow the procedure described in
Recording on page 18.
[1] a k
[MENU]: EXIT
MODE SET
DIGITAL TBC/NR ON
B.E.S.T. ON
PICTURE CONTROL AUTO
AUTO TIMER OFF
O.S.D. ON
PROG. NAVIGATION ON
DIRECT REC ON
NEXT PAGE
F
F
HR-S7955EK-EN/p31-54 4/18/02, 06:14 PM44