Filter
Top Products
advanced features 45
Satellite Receiver
Control Settings
The following procedure is required if you receive satellite channels through
a satellite receiver. Around 20 seconds before the VIDEO Plus+ timer record-
ing or Manual timer recording starts, the VCR sets its input mode to L-2 and
automatically switches the satellite receiver’s channels using the provided
Satellite Controller.
Installing Satellite Controller
situate satellite controller Place
the Satellite Controller so that the path
between its transmitter and the satellite
receiver’s remote sensor is unobstructed.
attach satellite controller Fix
securely using the adhesive strip at-
tached on the back of the Satellite
Controller.
connect up Be sure to connect the
recorder’s
AV2 (L-2) IN/DECODER
connector to the satellite receiver’s 21-
pin SCART connector.
note When connecting your satellite
receiver, refer to its instruction manual.
connect satellite controller to
vcr Connect the Satellite Controller to
the
SAT CONTROL connector on the rear
panel.
IN/OUT
ENTREE/SORTIE
AV1(L-1)
IN/DECODER
ENTREE/DECODEUR
PAUSE
TELEC.
SORTIE
RF OUT
ANT. IN
ENTREE
OUT
SORTIE
SAT
CONTROL
SAT
CTL
AV2(L-2)
OUT
SORTE
VIDEO
L
R
ANTENNE
DECODER VCR TV
Satellite Receiver
Satellite Controller
(suggested locations)
Your VCR
Satellite Receiver
Satellite Controller
Your VCR
Transmitter
HR-S7955EK-EN/p31-54 4/18/02, 06:14 PM45