Filter
Top Products
equipment key 7
Diagram Key
FRONT PANEL
1 STANDBY/ON o Button
turns VCR on/off (loading a
cassette also turns power on).
2 Cassette Loading Slot is
where cassette is inserted;
door closes.
3 24H EXPRESSc Button
enables 24H Express Timer
Programming.
4 Advanced JOG Dial enables
picture search, preset position
selection or 24H Express
Timer Programming.
5 S-VIDEO Input Connector
enables S-VIDEO connection
to camcorder or second VCR.
6 VIDEO Input Connector
enables easy connection of
video output from another
VCR or camcorder for editing.
7 AUDIO Input Connector
[L] enables easy connection
of audio output (mono) from
another VCR, camcorder or
other source for editing.
8 AUDIO Input Connector
[R] enables easy connection
of audio output (Hi-Fi) from
another VCR, camcorder or
other source for editing.
9
§ Button stops tape;
ejects tape during Stop mode.
10 S-VHS ET Button
enables/ disables S-VHS ET
mode.
11 Display Panel provides
clear view of various displays
and indicators.
12 Infrared Beam Receiving
Window is where Remote
Control should be aimed when
in use.
13 SATc Button enables/
disables the Auto Satellite
Programme Recording mode.
14 T Button starts regular
recording (press once), Instant
Timer Recording (press twice);
sets duration of ITR.
15 | Button stops tape
temporarily during recording;
stops tape temporarily during
playback; plays back frame by
frame with each additional
press.
16 . Button plays back tape;
cancels Pause, Still, Slow,
Search modes.
REAR PANEL
1 Mains Power Cord
supplies power to VCR.
2 S-VIDEO OUT Connector
enables S-VIDEO connection
to TV or second VCR.
3 AV1 (L-1) IN/OUT
Connector enables AV
connection to TV or second
VCR; input recordable when
L-1 selected.
4 SAT CONTROL Connector
enables connection of the
provided Satellite Controller
for timer recording with a
satellite receiver.
5 ANT. IN Connector enables
connection of aerial.
6 RF. OUT Connector enables
connection to aerial terminal
of TV receiver.
7 AUDIO OUT (L/R)
Connectors enable connection
of audio cassette recorder, TV
or second VCR for dubbing.
8 Remote Pause Connector
enables connection to second
VCR equipped with R.A. Edit
connector, or to JVC
camcorder equipped with
master Edit control, for easy
editing.
9 AV2 (L-2) IN/DECODER
Connector enable connection
of satellite receiver or second
recorder; input recordable
when L-2 selected.
VCR DISPLAY PANEL
1
Indicator blinks after
timer-recording and shows
how many programmes have
been timer-recorded.
2 Play Indicator lights up
during playback; blinks during
Repeat Playback or when
using Next Function Memory
for playback.
3 Record Indicator lights up
during recording; blinks
during Instant Timer
Recording.
4 Programme Start Time
Indicator shows the
programme start time for 24H
Express Timer Programming.
5 S-VHS Indicator lights
when a cassette marked S-
VHS is inserted with S-VHS
mode set to ‘ON’, when an S-
VHS-recorded tape or S-VHS
ET-recorded tape is played
back, or when S-VHS ET
mode is engaged.
6 Programme Stop Time
Indicator shows the
programme stop time for 24H
Express Timer Programming.
10 Channel Display shows
preset position where the
station currently being
received is stored.
Mode shows external input
mode selected (L-1 or L-2).
Clock Display shows
current time.
Preset Position* (or Mode)
and Clock Display appear
alternately when b is
pressed.
* Preset Position (or Mode) is
not displayed during playback.
REMOTE CONTROL
1 TV Button enables Remote
Control of your JVC TV. (While
holding down the TV button,
press the corresponding
button with a small dot on
the left side of the
name):STANDBY/ON o, TV/
VCR, TV PR+/-, TV
+/– ,
(TV muting).
2 TV/VCR Button switches
connected TV’s mode between
TV and AV.
3 rButton
‘reviews’ timer-recorded
programme.
4 Number Keys are used in
preset position selection and
the VIDEO Plus+ Timer
Programming.
5 PDC Button enables/
disables PDC recording.
* VPS (Video Programme
System) recording is not currently
available in the U.K. and not
possible with this VCR.
6 x Button cancels timer-
programme.
0000 Button resets
counter on the on-screen
display to ‘0:00:00’.
7 STOP +/– Button inputs
programme Stop Time.
8 START +/– Button
accesses Regular Program
screen; inputs programme
Start Time.
9 PROG Button accesses
VIDEO Plus+ Program screen.
10 C Button accesses
Program screens/displays to
check the programme that you
have programmed (next
programme’s information
screen appears each time
button is pressed).
11 < Button rewinds
the tape; initiates high-speed
reverse search.
12 T Button starts recording
in combination with the .
Button or the Remote
Control.
13 S Button stops tape.
14 m Button accesses
Menu screen.
7 VCR Indicator lights when
the VCR is in the video mode.
At this point, the TV automati-
cally enters AV mode.
8 c Indicator lights when
the c button has been
pressed to engage Timer
mode.
9
Indicator lights up
during Auto Satellite
Programme Recording
standby mode; blinks when
Auto Satellite Programme
Recording is in progress.
15 AB Buttons are
used for selection in on-screen
menus.
TV PR +/– Buttons selects
the connected JVC TV's
channel.
16 STANDBY/ON o Button
— same as button on VCR.
17 AUDIO Button changes
output sound mode.
(TV Muting) Button
mutes sound of connected JVC
TV.
18 b(Display) Button
switches display between
clock time and Preset
Position* (or Mode).
* Preset Position (or Mode) is not
displayed during playback.
19 DAILY Button enables
timer recording of daily
serials.
20 WEEKLY Button enables
timer recording of weekly
serials.
21 AUX Button selects VCR’s
auxiliary input mode.
22 c Button engages timer-
standby mode.
23 DATE +/– Button inputs
date of programme for timer
recording.
24 PR +/– Button selects a
preset position.
25 Auto Tracking Button
enables/disables auto
tracking mode during
playback.
/ Button selects tape
speed.
26 3 Button
initiates a 30-second period of
fast-motion playback.
27 . Button — same as
button on VCR.
28 > Button fast-
forwards tape; initiates high-
speed forward search.
29 | Button — same as
button on VCR.
30
O
K
3
/
Button enters
selections made in on-screen
menus.
Button — Shows
current VCR status on the TV
screen if O.S.D is set to ON.
31 D E Buttons initiate
functions such as Index
Search, variable-speed search,
frame by frame playback.
TV
+/– Buttons control
volume of connected JVC TV.
HR-S7955EK-EN/p02-07 4/18/02, 06:07 PM7