JVC HR-V510E VCR User Manual


 
April 6, 2004 10:11 am Page 11
—11—
Master Page: Right
Editing with another video recorder or a
camcorder
You can use your recorder as the source player or the recording
deck. You can use a camcorder as the source player and your
recorder as the recording deck. Refer also to the other
components’ instruction manuals for connection and its
operations.
A Make connections
Connection with another video recorder
Connection with a camcorder
Connect the camcorder’s AUDIO/VIDEO OUT connectors to the
recorder’s L-1 IN/OUT connector via a cable adapter.
B Load cassettes
Insert the playback cassette into the source player and the cassette
to be recorded on into the recording deck.
C Select input mode on recording deck
Select the correct external input on the recording deck. On this
recorder, press
AUX
or
PR
r
/
t
on the remote control or
PR +/– on
the recorder.
Select “L-1” for the L-1 IN/OUT connector.
D Select edit mode
Select the appropriate edit mode for the components if such a
mode is equipped.
On this recorder, set “PICTURE CONTROL” to “EDIT”. (
12)
E Start playback
Engage the Play mode of the source player.
F Start recording
Engage the Record mode of the recording deck.
Connecting/Using a stereo system
You can listen to the soundtrack through your stereo system.
Connect the AUDIO OUT L and R connectors on the recorder to
the AUX IN or TAPE MONITOR connectors on your stereo
system’s receiver or amplifier.
When listening to sound through the connected stereo system,
turn the TV’s volume down completely.
Mode Set
You can change various mode settings.
A Access Main Menu screen, then Mode Set screen
Press MENU. Press rt to place the
pointer next to “MODE SET”, then press
OK or e.
B Select mode
Press rt to place the pointer next to the
item you want to set.
C Change setting
Press OK or e. The default setting is bold in the following table.
Press MENU to return to normal screen.
Editing
Your recorder
Another recorder
To L1 IN/OUT
21-pin
SCART cable
(not
provided)
System Connections
Subsidiary Settings
Turn on the recorder and the TV, and set your TV to its AV mode
or video channel.
HR-V510_001EN.fm Page 11 Tuesday, April 6, 2004 10:11 AM