Filter
Top Products
April 6, 2004 10:11 am Page 14
—14—
Master Page: Right
Deleting a channel
A Access Confirmation screen
Perform step 1 of “Manual Channel Set” (੬ 13).
B Select position
Press rt w e to until the channel you want to delete begins
blinking.
C Delete channel
Press &. The channel directly beneath the cancelled one moves
up one line.
● Repeat steps
2 – 3 as necessary.
D Return to normal screen
Press MENU.
Changing station channel positions
A Access Confirmation screen
Perform step 1 of “Manual Channel Set” (੬ 13).
B Select position
Press rt w e until the station you want to move begins blinking,
then press OK. The channel number (CH) begins blinking.
C Select new position
Press rt w e to move the station to the new position, then press
OK.
Example: If you moved the station in position 4 to position 2, the
stations originally in positions 2 and 3 each move down one
space.
● Repeat steps
2 – 3 as necessary.
D Return to normal screen
Press MENU.
Changing station name
A Access Confirmation screen
Perform step 1 of “Manual Channel Set” (੬ 13).
B Select position
Press rt w e until the channel you want to change the station
name begins blinking, then press OK twice
. The Manual Channel
Set screen appears.
C Input station name
Press e until the first letter of the station name (ID) begins
blinking. Press rt to cycle through the characters, then press e.
Enter the remaining characters the same way (maximum of 4).
After entering all characters, press OK.
● The characters available for the station name (ID) are A-Z, 0-9,
–, *, +, _ (space).
● If you make a mistake, press w until the incorrect character
begins blinking. Then enter the correct character by pressing
rt.
D Return to normal screen
Press MENU.
Fine-tuning channels
A Access Confirmation screen
Perform step 1 of “Manual Channel Set” (੬ 13).
B Select position
Press rt w e until the channel you want to tune begins blinking,
then press OK twice
. The Manual Channel Set screen appears.
C Perform tuning
Press e until “+/–” begins blinking, then press rt until the
picture is its clearest. Then press OK.
● Repeat steps
2 – 3 as necessary.
D Return to normal screen
Press MENU.
HR-V510_001EN.fm Page 14 Tuesday, April 6, 2004 10:11 AM