Filter
Top Products
EN 47
RETURN TO FUNCTION
SET SCREEN
8
Press MENU.
ACCESS AUX INPUT
SCREEN
9
Press CH
5
∞ or SHUTTLE PLUS
%fi
to move the
highlight bar (arrow) to “AUX INPUT”, then press OK.
SELECT INPUT
10
If you are connecting the
AV cable to the
AV
connectors on the front of
the VCR
, move the
highlight bar (arrow) to
"FRONT" by pressing
CH
5
∞ or SHUTTLE PLUS
%fi. If you are connecting
the AV cable to the
AV
connectors on the back of the VCR
, move the highlight
bar (arrow) to "REAR" by pressing CH
5
∞ or SHUTTLE
PLUS
%fi
.
RETURN TO NORMAL
SCREEN
11
Press MENU as many times as necessary.
START PLAYER
12
Set the camcorder to its play mode.
NOTE:
If the camcorder is equipped with a superimpose/OSD
disable feature then set its superimpose or display
feature to OFF before pressing play.
START RECORDER
13
Set your VCR to its record mode.
● If you are using a Master Edit Control-equipped JVC
camcorder, it can put the recorder automatically into
Record mode. (Refer to camcorder's instruction
manual.)
2
2
q
5
/
8
6
AUX INPUT
=FRONT
REAR
PRESS (5,∞) TO SELECT
PRESS (MENU) TO END
OK
CH
MENU
3
¶
4¢
78
1
¡
1
2
3
456
7
8
0
9
CH
MENU
OK
SHUTTLE PLUS
NOTE:
If you use a cable box or a DBS receiver connected to one of
the VCR's auxiliary input connectors, be sure to select again the
required input at the AUX Input screen when you finish editing.