JVC HR-XV32E DVD VCR Combo User Manual


 
Filename [XV3EX_09Editing.fm]
Masterpage:Left+
56 EN
Page 56 August 22, 2003 12:20 pm
EDITING (VHS DECK) (cont.)
Dubbing
(from DVD to VHS)
You can dub selected scenes from the DVD disc to a cassette,
starting and stopping wherever you wish.
However, it is not possible to dub copy-protected discs.
In such case, “ERROR” appears on the front display panel.
A
Load a cassette and place a disc.
For the VHS deck
Insert a cassette with the record safety tab intact.
For the DVD deck
A Press x on the DVD deck to open the disc tray.
B Place the disc in the disc tray.
C Press x on the DVD deck to close the disc tray.
B
Prepare the VHS deck for dubbing.
A Press VCR.
B Press
p to select recording speed.
C Search for the point where you want to start dubbing
by pressing 4, 5 or 3 then press 8.
C
Prepare the DVD deck for dubbing.
A Press DVD.
B Start playback and search for the point where you
want to start dubbing by pressing 4, 5 or 3.
D
Start dubbing.
A little before the dubbing start point, press and hold 7,
then press 4 on the remote control.
“DUB” lights on the front display panel.
E
End dubbing.
Press 8.
Be sure to press 8 while the VCR indicator lights up on the
unit.
If you press 8 or x with the DVD deck selected, the dubbing
stopped, but the opening screen is also recorded.
When you have finished dubbing, press DVD to select the
DVD deck and press 8 to stop playback.
NOTES:
Set “ON SCREEN GUIDE” to “OFF” ( pg. 67) if you do not
want to record the on-screen display for DVD discs during
dubbing.
There may be a discrepancy of several seconds between where
you intend editing to start, and where it actually starts.
The superimposed indication during the operation or dubbing
is not recorded.
Set “PICTURE CONTROL” to “EDIT”. (
pg. 63)
Turn on the TV and select the video channel (or AV
mode).
Slide the TV/VCR/DVD switch to the right.
XV3EX_01.book Page 56 Friday, August 22, 2003 12:21 PM