JVC HR-XV32E DVD VCR Combo User Manual


 
Masterpage:Right0
EN 57
Filename [XV3EX_09Editing.fm]
Page 57 August 22, 2003 12:20 pm
EDITING (DVD DECK)
Digital Audio Dubbing
You can dub selected audio from the DVD or Audio CD disc to
an MD etc.
However, it is not possible to dub copy-protected discs.
Example: Dubbing to an MD
A
Make connections.
Connect the optical cable between the unit and the
digital audio device.
B
Place a disc and load an MD.
For the DVD deck
A Press x on the DVD deck to open the disc tray.
B Place the disc in the disc tray.
C Press x on the DVD deck to close the disc tray.
For the digital audio device
Insert an MD.
C
Prepare the DVD deck for dubbing.
A Press DVD and select the audio to be dubbed.
B Search for the point where you want to start dubbing
by pressing 4, 5 or 3 then press 8.
C Press 3 a little, then press 4 to start playback.
D Press 9 to pause playback a little before the start
point.
D
Prepare the audio device for dubbing.
Select the input mode.
E
Start dubbing.
A Press 4 to start playback on the DVD deck.
B Start recording on the audio device.
F
End dubbing.
Stop recording on the audio device. Then press 8 to stop
playback on the DVD deck.
NOTES:
There may be a discrepancy of several seconds between where
you intend editing to start, and where it actually starts.
You can also dub audio from a Video CD or SVCD. Set
“DIGITAL AUDIO OUTPUT” to “PCM ONLY”. (
pg. 66)
Turn on the TV and select the video channel (or AV
mode).
Slide the TV/VCR/DVD switch to the right.
Note for connection:
Remove the connector cover from
the unit and remove the protection
cap from the cable.
Digital audio device
(MD deck etc.)
Optical cable
(not provided)
DIGITAL AUDIO OUT
Player
R
ecor
d
er
XV3EX_01.book Page 57 Friday, August 22, 2003 12:21 PM