Filter
Top Products
Masterpage:Right-No-Heading
EN 31
Filename [XVC24S_07S-VHS.fm]
Page 31 28 February 2005 9:11 am
Basic Recording
A
Load a cassette.
Insert a cassette with the record safety tab intact.
● The unit’s power comes on automatically and the counter is
reset to 0:00:00.
B
Select the VCR deck.
On the unit
Press VCR/DVD repeatedly so that the VHS indicator
lights up on the front display panel.
On the Remote
Press VCR so that the VHS indicator lights up on the front
display panel.
C
Choose a program.
Press CH +/– or the number keys to select the channel
you wish to record.
D
Set the tape speed.
Press SP/EP. The current setting appears on the front
display panel or TV screen. Press SP/EP again to change
the setting while the tape speed is displayed on the TV
screen.
E
Start recording.
Press and hold 7 REC and press 4 PLAY on the Remote,
or press 7 REC on the unit.
F
Pause/Resume recording.
Press 9 PAUSE. Press 4 PLAY to resume recording.
● You can select channel during the Record Pause mode.
G
Stop recording.
Press 8 STOP. Then press x EJECT on the VCR deck to
remove the cassette.
NOTE:
When the end of the tape is reached during recording, the unit
stops and “
⅜” and “$” blink on the front display panel.
● Turn on the TV and select the VCR channel (or AV
mode).
● Slide the TV/VCR/DVD switchon the Remote to the
right.
7
STOP
EJECT
3
PLAY
VCR/DVD
CH +/
–
¶
REC
7
STOP
3
PLAY
SP/EP
VCR
CH +/
–
¶
REC
8
PAUSE
Load a cassette.
Slide to the
right.
Number keys
Accidental erasure prevention
To prevent accidental recording on a recorded cassette,
remove its safety tab. To record on it later, cover the hole
with adhesive tape.
Record safety tab
XVC24S_01.book Page 31 Monday, February 28, 2005 9:24 AM