Filter
Top Products
Filename [XVC29U_07S-VHS.fm]
Masterpage:Left+
34 EN
Page 34 14 June 2004 3:52 pm
OPERATIONS ON VCR DECK (cont.)
Express Timer
Programming
Example: To timer-record the program from 8:00 PM to
10:00 PM on 24th December, on channel 12.
A
Select the VCR deck.
On the unit
Press VCR/DVD repeatedly so that the VCR indicator
lights up.
On the Remote
Press VCR so that the VCR indicator lights up.
B
Access the Program screen.
C
Enter the program start time.
D
Enter the program stop time.
Press STOP +/– to enter the time you want recording to
stop.
● Press and hold STOP +/– to move in 30-minute increments, or
press and release repeatedly to move 1 minute at a time.
E
Enter the program date.
Press DATE +/–.
● The current date appears on the TV screen. The date you enter
appears in its place.
Before performing Express Timer Programming:
● Make sure that the unit’s built-in clock is set properly.
● Insert a cassette with the safety tab in place. The unit will
come on automatically.
● Turn on the TV and select the VCR channel (or AV mode).
● Slide the TV/VCR/DVD switch to the right.
Press PROG.. (If you’re just
starting out, “PROGRAM 1”
appears.)
Press START +/– to enter the
time you want recording to
start.
● Press and hold START +/– to
move in 30-minute
increments, or press and
release repeatedly to move
1 minute at a time.
XVC29U_07S-VHS.fm Page 34 Monday, June 14, 2004 3:53 PM