JVC HR-XVC29UJ DVD Player User Manual


 
Filename [XVC29U_09Editing.fm]
Masterpage:Left+
68 EN
Page 68 14 June 2004 3:54 pm
EDITING (VCR DECK) (cont.)
Dubbing
(from DVD to VCR)
You can dub selected scenes from the DVD disc to a cassette,
starting and stopping wherever you wish.
However, it is not possible to dub the copy-protected disc.
In such case, “ERROR” appears on the front display panel.
A
Load a cassette and place a disc.
For the VCR deck
Insert a cassette with the record safety tab intact.
For the DVD deck
A Press OPEN/CLOSE (x) on the DVD deck to open the
disc tray.
B Place the disc in the disc tray.
C Press OPEN/CLOSE (x) on the DVD deck to close the
disc tray.
B
Prepare the VCR deck for dubbing.
A Press VCR.
B Press SP/EP to select recording speed.
C Search for the point where you want to start dubbing
by pressing PLAY (4), FF (5) or REW (3) then
press STOP (8).
C
Prepare the DVD deck for dubbing.
A Press DVD.
B Search for the point where you want to start dubbing
by pressing PLAY (4), FF (5), REW (3), 6 or
2.
C Press PAUSE (9) to pause playback a little before the
start point.
D
Start dubbing.
Press and hold REC (7), then press PLAY (4) on the
Remote.
“dub” lights on the front display panel.
E
End dubbing.
Press STOP (8).
Be sure to press STOP (8) while the VCR indicator lights up on
the unit.
NOTES:
You can dub from DVD to VCR regardless of the scan mode
setting. (
pg. 78) However, the progressive signals will be
converted to the interlace signals when dubbing.
Set “ON SCREEN GUIDE” to “OFF” (
pg. 78) if you do not
want to record the on-screen display for DVD discs during
dubbing.
There may be a discrepancy of several seconds between
where you intend editing to start, and where it actually starts.
The superimposed indication during the operation or dubbing
is not recorded.
Set “PICTURE CONTROL” to “EDIT”. (
pg. 73)
Turn on the TV and select the VCR channel (or AV
mode).
Slide the TV/VCR/DVD switch to the right.
XVC29U_09Editing.fm Page 68 Monday, June 14, 2004 3:55 PM