Filter
Top Products
14
Initial Settings (continued)
Clock Set
Perform clock setting only if the clock has not been set
correctly by the Plug&Play setting.
• Turn on the TV and select the VCR channel (or AV
mode).
• Slide the TV/VCR/DVD switch on the Remote to the
right.
Preparations
~ Select the VCR deck.
Press VCR on the Remote so that the VHS indicator
lights up on the front display panel.
Ÿ Access the Main Menu screen.
Press SET UP.
! Access the Initial Set
screen.
Press %fi to move the
highlight bar (arrow) to
“INITIAL SET,” then press
ENTER.
⁄ Access the Clock Set
screen.
Press %fi to move the
highlight bar (arrow) to
“CLOCK SET,” then press
ENTER.
Manual Clock Set
~ Set the time, date, and
year.
Press %fi to set the hour, then
press ENTER.
Set the date and year in the
same way.
• Press and hold %fi to change
the time by 30 minutes or the date by 15 days.
Ÿ Select D.S.T. mode.
Press ENTER to move the
highlight bar to “D.S.T.,” then
press %fi to select the desired
setting.
ON: Adjustment will be made
by the built-in clock itself.
OFF: Select when Daylight Saving Time does not
apply to you.
! Start clock.
Press SET UP and normal screen appears.
To make corrections any time during the process
Press ENTER repeatedly until the item you want to
change blinks, then press %fi.
Semiauto Clock Set
You can change the host channel/D.S.T. (Daylight
Saving Time)/time zone setting manually.
NOTE:
The time set previously will be erased when “AUTO CLOCK,”
“HOST CH,” “D.S.T.,” or “TIME ZONE” setting is changed.
~ Set “AUTO CLOCK” to
“ON.”
Press ENTER repeatedly to
move the highlight bar to “AUTO
CLOCK,” then press %fi so that
“ON” is selected.
Ÿ Select the host channel.
You can either select “AUTO” or enter a PBS channel
number.
Press ENTER to move the highlight bar to “HOST CH,”
then press %fi repeatedly until “AUTO” or the desired
PBS channel number is selected.
NOTE:
Some PBS channels do not transmit clock setting data.
! Select the D.S.T. mode.
Press ENTER to move the highlight bar to “D.S.T.,”
then press %fi repeatedly until the desired setting is
selected.
AUTO: Select if you want to adjust your VCR’s clock
automatically by the incoming signal from the
host channel. Be sure to select the correct
time zone manually in step ⁄.
ON: Adjustment will be made by the built-in clock
itself.
OFF: Select when Daylight Saving Time does not
apply to you.
⁄ Select the time zone.
Press ENTER to move the highlight bar to “TIME
ZONE,” then press %fi repeatedly until “AUTO” or the
desired time zone is selected. Each time you press the
button, the time zone changes as follows:
O AUTO O ATLANTIC O EASTERN O CENTRAL
O MOUNTAIN O PACIFIC O ALASKA O HAWAII O
(back to the beginning)
@ Complete the Semiauto Clock Set.
Press SET UP to return to normal screen.
IMPORTANT
Turn off the unit after performing Semiauto Clock.
“Auto” will appear on the front display panel while the
clock is being set. The current clock time will appear
automatically when the clock setting is complete.
12-19_HR-XVC32SUJ.indd 1412-19_HR-XVC32SUJ.indd 14 05.4.21 6:30:34 PM05.4.21 6:30:34 PM