JVC HR-XVC33UM DVD VCR Combo User Manual


 
Masterpage:Right-No-Heading
EN
87
Filename [XVC33UM_11Trouble.fm]
Page 87 4 August 2003 6:50 pm
OTHER PROBLEMS
SYMPTOM POSSIBLE CAUSE CORRECTIVE ACTION
1. The image of TV broadcast appears
distorted on the TV screen.
The unit leaves turned on and the DVD
deck is selected.
Turn off the unit, or press
VCR
to select the
VCR deck, then press
TV/VCR
so that the
VCR indicator disappears from the front
display panel.
2. Whistling or howling is heard from the
TV during camcorder recording.
The camcorder’s microphone is too
close to the TV.
Position the camcorder so its microphone
is away from the TV.
The TV’s volume is too high. Turn the TV’s volume down.
3. When scanning channels, some of
them are skipped over.
Those channels have been designated to
be skipped.
If you need the skipped channels, restore
them. (
pg. 27)
4. The channel cannot be changed.
Recording is in progress. Press
PAUSE
(
9
) to pause the recording,
change channels, then press
PLAY
(
4
) to
resume recording.
5. Channel settings that were made
manually seem to have changed or
disappeared.
After the manual settings were made,
Auto Channel Set was performed.
Perform manual setting again.
ATTENTION
This unit contains microcomputers. External electronic noise or interference could cause malfunctioning. In such cases, switch the
unit off and unplug the AC power cord. Then plug it in again and turn the unit on. Take out the cassette. After checking the cassette,
operate the unit as usual.
XVC33UM_01.book Page 87 Monday, August 4, 2003 7:24 PM