JVC AV 27D200 CRT Television User Manual


 
CHANNEL SUMMARY
You can add or delete channels from
channel scanning. You can also lock
out any “unauthorized” viewers from
one or up to all 125 channels.
Press the MENU Button
To CHANNEL SUMMARY
To operate
Note: Noise Muting will not work while
you are in the Channel Summary menu
.
SCAN
You can manually set channels to scan
that were too weak to be picked up
during Auto Tuner Setup. Conversely, if a
channel was too weak to receive a good
p i c t u re but was picked up anyway, delete
it by removing the
.
(If you have not
p e rf o r med the Auto Tuner Setup
described on page 15, do so now.)
CH A N N E L - / + to select the channel
To the SCAN column
To include or delete from scan
EXIT when finished
Note: Channels set to scan will be
marked with an
.
Note: Some cable systems experience
interference from radio frequencies on
Cable Channel 95. If you like, you can
delete this channel f rom scanning by
removing the .
CHANNEL GUARD - LOCK
To CHANNEL SUMMARY
To operate
To the Lock column
The access code zero (0) to
lock or unlock that channel
Use the CHANNEL -/+ button to go to any
other channel you want to lock
EXIT when finished
CHANNEL GUARD MESSAGE:
This message appears when a viewer
attempts to watch a guarded channel :
To watch a channel you have locked,
enter the lock code using the 10 key pad.
If the wrong lock code is entered, this
message will appear:
Note: See "Set Lock Code", for more
information.
I N VALID LOCK CODE !
T H I S CHANNEL IS LOCKED BY
CHANNEL GUA R D .
PLEASE ENTER LOCK CODE BY
10 KEY PAD TO UNLOCK IT.
NO. – – – –
Continued above…
CH NO. SCAN CH NO. SCAN
0 1 06
0 2 07
0 3 08
0 4 09
0 5 10
CH NO. SCAN CH NO. SCAN
0 1 06
0 2 07
0 3 08
0 4 09
0 5 10
I N I T I A L S E T U P
1
7
NOTES:
Initial Setup Menu
items:
Auto Tuner
Setup, and
Language are
described in
detail in the Plug
In Menu section
In the Channel
S u m m a ry :
To move up and
down a column
(e.g. from channel
to channel) use the
CH A N N E L- / + button
To move from item
to item (e.g. from
channel number to
scan to lock) use
the MENU UP/DOWN
buttons.