Filter
Top Products
Button Functions
43
DVD Buttons
VCR Buttons
TV/CATV Switch
VCR/DVD Switch
You can also use this remote control to operate the basic functions of your DVD player. These
functions include: play, rewind, fast-forward, stop, still/pause, previous/next, tray open/close, power
on, and power off.
Move the selector switch to DVD to operate.
• The remote is preset with the code 000 to control JVC-brand DVD players. For any other
manufacturer’s brand DVD player, please see the code chart and instructions on page 20.
Use either the television’s own tuner or a cable box to select channels. Set this switch to TV to operate
the television’s built-in tuner. Move the switch to CATV to operate a cable box.
• See page 18 for information on programming your remote for cable box operation.
You can control a VCR or DVD player with the buttons on the lower part of the remote control. Use the
VCR/DVD selector switch to choose either VCR or DVD operation.
• See pages 19 and 20 for information on programming your remote with VCR and DVD operating
codes.
You can use this remote control to operate the basic functions of your VCR. These functions
include: play, record, rewind, fast-forward, stop, pause, channel scan, TV/VCR, power on, and
power off.
Move the selector switch to VCR to operate.
• The remote is preset with the code 000 to control JVC-brand VCR’s. For any other manufacturer’s
brand VCR, please see the code chart and instructions on page 19.