JVC AV 36120 CRT Television User Manual


 
Return+
The RETURN+ button has two functions:
Return - Returns to the channel viewed just
before the channel currently onscreen.
Return+ - Lets you program a specific channel to
return to while scanning through the channels.
RETURN+ and hold for three seconds
Scan using the Channel+/- buttons
RETURN+
You will return to your programmed
channel.
• To cancel your Return+ channel, press and hold
the RETURN+ button for three seconds. The
message “RETURN CHANNEL CANCELLED!” will
appear.
Return+ works only with CHANNEL+/-. Pressing
any number key will cancel Return+.
• Return+ does not effect the PIP channel.
• For more information on Return and Return+,
turn to page 11.
VCR Buttons
You can use this remote control to operate the
basic functions of your VCR. These functions
include: play, record, rewind, fast-forward, stop,
pause, channel scan, TV / VCR, power on, and
power off.
The remote is preset with the code 000 to control
JVC-brand VCR’s. For any other manufacturer’s
brand VCR, please see the code chart and
instructions on page 13.
Number Buttons - 10 Key Pad
To move directly to a specific channel, enter the
channel number with the number buttons on the
remote. For example, to move to Channel 7:
0 (zero )
7 (seven)
100+ Button
Use the 100+ button to directly access channels
above Channel 99. For example to move to
channel 124:
1 0 0 +
2 (two)
4 (four)
RETURN CHANNEL
PROGRAMMED !
Button Functions 27
Hyper Surround
Creates a deep, three-dimensional sound effect
by channeling the audio through the TV's
front-firing speakers. Press the HYPER SURROUND
button to turn the effect on or off.
Hyper Surround is available on all models
except AV-32115.
Muting
The MUTING button instantly turns the volume down
completely when you press it.
MU T I N G
The volume level will instantly go to zero.
To restore the volume to its previous level, press
MUTING again.
HYPER SURROUND ON OFF