JVC AV 56WP84 Projection Television User Manual


 
Initial Setup
44
If your TV is connected to a stereo system, you can turn off the TV speakers and listen to the
audio through your stereo.
Press the M
ENU button
π
To TV SPEAKER
®
To turn the TV’s speakers ON or OFF
Press the MENU button when finished
Notes:
• Before you turn the TV speaker setting from OFF to
ON, make sure that the TV volume level is low! If the
TV volume is set too high, the sound level will be extremely loud.
• After a power interruption, the TV speaker settings will return to “ON”.
TV Speaker
When you are using a surround system, you can substitute the speaker of this television for
the center speaker of you surround system. Set CENTER CH INPUT to on when you use the
speaker as the center speaker of your surround system.
Press the MENU button
π
To CENTER CH INPUT
®
To adjust CENTER CH INPUT to “ON” or “OFF”
Press the MENU button when finished
If your television is connected to an external speaker source, audio out gives you the option of
controlling the volume level with your TV’s remote control.
Press the MENU button
π
To AUDIO OUT
®
To VARI or FIX
Press the MENU button when finished
VARI: Lets you adjust the volume of the external speakers
using the VOLUME +/– buttons on your TV’s remote control.
FIX: The volume of the external speakers is adjusted using
the audio device’s remote control.
Audio Out
Center CH Input
AV-56\65WP84 English 44 7/11/03, 9:32:52 AM