Filter
Top Products
14
AUTO CH MEMORY
CH SET-UP
ADD / DELETE
CH LABEL
▲
/
▼
/ ENTER / MENU / EXIT
TV
CATV
AUTO CH MEMORY
CH SET-UP
ADD / DELETE
CH LABEL
▲
/
▼
/
/
/ MENU / EXIT
TV CATV
LANGUAGE / IDIOMA / LANGUE
CH SET-UP
PICTURE
V-CHIP SET
CLOCK SET
ON/OFF TIMER
MENU
AUDIO
▲ / ▼ / ENTER / MENU / EXIT
TO MEMORIZE CHANNELS
This TV is equipped with a channel memory feature which
allows channels to skip up or down to the next channel set
into memory, skipping over unwanted channels.
Before selecting channels, they must be programmed into
the TV's memory. In addition to normal VHF and UHF
channels, this TV can receive up to 113 Cable TV channels.
To use this TV with an antenna, set the TV/CATV menu
option to the TV setting. When shipped from the factory, this
menu option is in the CATV setting.
TV/CATV SELECTION
Press the MENU button.
Press the CH + (▲) or – (▼) button
until the indicator next to "CH SET-
UP" begins to flash, then press the
ENTER button.
Press the CH + (▲) or – (▼) button
until the indicator next to "TV/CATV"
begins to flash.
Press the VOL + (
) or – ( ) button
to select the TV or CATV mode. The
arrow indicates the selected mode.
Press the EXIT button.
NOTE: Contact your cable company to determine the
type of cable system used in your area.
AUTOMATIC CHANNEL MEMORY
Press the MENU button.
Press the CH + (▲) or – (▼) button
until the indicator next to "CH SET-
UP" begins to flash, then press the
ENTER button.
Press the CH + (▲) or – (▼) button
until the indicator next to "AUTO CH
MEMORY" begins to flash, then press
the ENTER button. The TV will begin
memorizing all the channels available
in your area.
Press the EXIT button.
1
2
3
4
5
1
2
3
4
LANGUAGE / IDIOMA / LANGUE
CH SET-UP
PICTURE
V-CHIP SET
CLOCK SET
ON/OFF TIMER
MENU
AUDIO
▲ / ▼ / ENTER / MENU / EXIT
AUTO CH MEMORY
CH SET-UP
ADD / DELETE
CH LABEL
TV CATV
▲
/
▼
/ ENTER / MENU / EXIT
ADD CH 012
0
-
9
▲
/
▼
/
/
/
MENU
/ EXIT
LANGUAGE / IDIOMA / LANGUE
CH SET-UP
PICTURE
V-CHIP SET
CLOCK SET
ON/OFF TIMER
MENU
AUDIO
▲ / ▼ / ENTER / MENU / EXIT
TO ADD/DELETE CHANNELS
Press the MENU button.
Press the CH + (▲) or – (▼) button
until the indicator next to "CH SET-
UP" begins to flash, then press the
ENTER button.
Press the CH + (▲) or – (▼) button
until the indicator next to "ADD/
DELETE" begins to flash, then press
the ENTER button.
Select the desired channels to be
added or deleted using the 10-key
pad (0-9) or the CH + or – button.
1
2
3
4
5 Press the VOL + ( ) or – ( ) button to select ADD or
DELETE.
If an unmemorized channel was selected (step 4), the
channel indication will be red. Press the VOL + (
) or –
(
) button if you wish to ADD the unmemorized
channel. The channel indicator will change from red to
green when a channel is added and the channel will be
memorized. If a memorized channel was selected (step
4), the channel indication will be green.
Press the EXIT button after adding or deleting all of the
desired channels, to return to normal TV viewing.
6
Press the VOL + ( ) or – ( ) button if
you wish to DELETE the channel from
memory. The channel indicator will
change from green to red when a
channel is deleted.
Repeat Steps 4 and 5 for each
channel to be added or deleted.
3L00501A E/14-BACK 27/3/2002, 17:0814