Filter
Top Products
16
NOTES:
• If you want to change password, follow steps 1 and 2 and select "CHANGE PASSWORD" option then enter your
new password.
• The V-Chip function is activated only on programs and tapes that have the rating signal.
• Once you block a program using the V-Chip function, the blocked program cannot be watched based on the content
of the show. When the program starts, the "IF YOU CANCEL PROTECT, INPUT PASSWORD" will appear on the
screen. When you want to release the V-Chip temporarily, enter the password.
If you change the channel or turn off and on the TV while releasing the V-Chip temporarily, the V-Chip setting will be
resumed.
• When you watch the TV from the cable box or the VCR with the RF Modulator, then you release the V-Chip
temporarily, the V-Chip setting will not be resumed until you turn off the TV. The TV channel is not used in this case.
• When changing the channel with the cable box or the VCR, approximately 10 seconds will pass until the program
appears.
• When you dislocated or lost the password, you can cancel the existing password by the following procedure:
- Press VOLUME – button of main unit.
- Keep pressing VOLUME – button of main unit and press "0" key of remote control simultaneously for a few
seconds.
SETTING V-CHIP
(CONTINUED)
for U.S.
TV RATING
R
NC-17
X
: under 17 years old
parental guidance
suggested
: 17 years old and above
: adult only
VOL – (