10
EN
INITIAL SETTINGS (cont.)
Clock Setting
Perform clock setting only if the clock has not been set
correctly by the Plug & Play setting or if you use a cable
box.
Access the Clock Set screen to perform the Semiauto or
Manual Clock Set. Each procedure starts from step 4
after preparation steps below are finished.
If you use a cable box, set the clock manually. (੬ pg. 12)
Preparations
1
Access Main Menu screen
Press MENU.
2
Access Initial Set screen
On the front panel:
Press CH5∞ to move
the highlight bar (arrow)
to “INITIAL SET”, then
press OK.
On the Remote:
Press SHUTTLE PLUS
5∞ to move the highlight bar (arrow) to “INITIAL
SET”, then press OK or SHUTTLE PLUS
3
.
3
Select clock set
On the front panel:
Press CH5∞ to move
the highlight bar (arrow)
to “CLOCK SET”, then
press OK.
On the Remote:
Press SHUTTLE PLUS
5∞ to move the highlight bar (arrow) to “CLOCK
SET”, then press OK or SHUTTLE PLUS
3
.
Turn on the VCR and the TV, and select the VCR
channel 3 or 4 (or AV mode) on the TV.
MAIN MENU
FUNCTION SET
TUNER SET
=
INITIAL SET
PRESS (5,∞), THEN (OK)
PRESS (MENU) TO END
INITIAL SET
=
CLOCK SET
LANGUAGE ENGLISH
SELECT WITH (5,∞) AND (OK)
PRESS (MENU) TO END
SPEP
VCR
1 8
2 – 7
2 – 7
1
7
89
2
4
1
3
2 3
4 5 6
0
1 8
2 – 7
2 – 7