Filter
Top Products
16
EN
Basic
Playback
Features
Changing display information
Press DISPLAY during playback.
Each time you press the button, the front panel display
shows the time counter and the clock time alternately.
● To display the VCR status including the time counter
and the clock time on the TV screen, see “Showing on-
screen display” (੬ pg. 21).
To reset the time counter, press C. RESET on the
Remote. The counter reading becomes “0:00:00”. It is
also reset when a tape is inserted.
Checking tape position
The tape position indicator
appears on screen in the
following cases:
● When you change the VCR
operation mode from the
stop mode to fast forward or
rewind mode.
● When you perform an Index
Search (੬ pg. 18) or Instant Review (੬ pg. 18).
The position of “
” in relation to “B” (Beginning) or “E”
(End) shows you where you are on the tape.
NOTES:
●
"SUPERIMPOSE" must be set to “ON”, or the indicator will
not appear (
੬
pg. 28, 29 ).
●
It may take a few seconds for the tape position indicator to be
displayed.
Playing back tape repeatedly
— Repeat Play
You can play back a tape repeatedly (100 times).
While playing back a tape, press and hold PLAY ( 3 )
for more than 5 seconds.
The play indicator ( # ) on the front display panel starts
flashing slowly, and a tape will be played back 100
times.
To stop playback, press STOP ( 7 ) on the Remote or
STOP/EJECT ( 7 / 0 ) on the front panel.
C
A
COUNT 0:33:27
BE
+++
B
Time Counter
Clock Time
BASIC PLAYBACK AND RECORDING (cont.)
SPEP
VCR
D
–1, 2, 3
STOP/EJECT
( 7 / 0 )
–2
1
7
89
2
4
1
3
2 3
4 5 6
0
A
A
C
F
–a, b, c
F
–a
F
–C
F
–b
E
D
STOP ( 7 )
C. RESET