JVC HR-S9500U VCR User Manual


 
42 EN
PLAYBACK AND RECORDING FEATURES (cont.)
Super VHS ET
Your VCR is equipped with Super VHS ET that makes it possible
to record with S-VHS picture quality on VHS cassettes.
NOTES:
You cannot activate the S-VHS ET function...
...while recording is in progress.
...while timer-recording (incl. Instant Timer Recording
pg.
45) is in progress.
...while Video Calibration (
pg. 36) is in progress.
...when the VCR's power is off.
S-VHS ET does not work with S-VHS tapes.
S-VHS ET
This facility allows recording with S-VHS picture quality on VHS cassettes. You can play back those cassettes recorded in S-VHS
ET on a VCR equipped with S-VHS ET.
NOTES:
To obtain the highest quality recording and playback pictures over a longer period on this model, S-VHS recording on S-VHS
tape is recommended.
You can play back S-VHS ET recordings not only on this VCR but also on another VHS VCR equipped with S-VHS ET.
* It is recommended to specifically label S-VHS ET recordings so you can easily distinguish them from regular VHS recordings.
S-VHS ET recordings can also be played back on an S-VHS VCR or a VHS VCR equipped with SQPB (S-VHS QUASI PLAY-
BACK) function. However, there may be cases where S-VHS ET playback is not possible on a particular VCR.
Frequent still, frame-by-frame and slow-motion playback may damage the tape and cause picture degradation.
With some tapes, better picture quality may not be obtained even with S-VHS ET recording. It is recommended that you do
test record beforehand to make sure whether better results can be obtained.
High Grade tapes are recommended for superior results.
Make sure that "VIDEO CALIBRATION" is set to "ON" at the Function screen (
pg. 36).
During S-VHS ET playback, noise may appear depending on tape quality.
Noise may appear during still, frame-by-frame, slow-motion playback and TimeScan search.
If the playback picture becomes blurred or interrupted, use a cleaning cassette.
SELECT S-VHS ET SET
MODE
1
Press S-VHS ET. The
current setting appears on
the screen for about 5
seconds.
ENGAGE S-VHS ET MODE
2
While the current setting is displayed on the screen,
press S-VHS ET again to set to "ON".
The "S-VHS" indicator lights on the front display
panel.
S-VHS ET : OFF
S-VHS ET