Filter
Top Products
—17—
Page 17 December 26, 2003 2:23 pm
Checking, Canceling or Changing Program
Settings
A
Disengage timer
Press TIMER, then press POWER 1.
● When “AUTO TIMER” is set to “ON” (
੬ pg. 18), you do not
have to press TIMER.
B
Access Program Check screen
Press PROG. CHECK.
C Access Program screen
Press PROG. CHECK again. Each time you
press PROG. CHECK, the next program’s
Program screen appears.
D
Cancel or change program setting
To cancel a program, press CANCEL when the Program screen
you do not want is shown.
To change a program, press the appropriate button: START+/–,
STOP+/–, DATE+/–, CH+/–, DAILY (Number key “8”), WEEKLY
(Number key “9”), and/or SP/EP when the Program screen on
which you want to make changes is shown.
E
Return to normal screen
Press PROG. CHECK repeatedly until no Program screen is
shown.
F Reengage timer recording standby mode
Press TIMER. The VCR turns off automatically and “
#
” is
displayed on the display panel.
● When “AUTO TIMER” is set to “ON” (
੬ pg. 18), the timer
recording standby mode automatically resumes when you turn
off the VCR.
Program Overlap Warning Display
If “PROGRAM NOT COMPLETED PROGRAM OVERLAP”
appears, you have another program overlapping the program you
have just made. The Program Check screen appears and
conflicting programs will start blinking.
Example:
Program 1 (you have just made) and Program 4 overlap each other
A
Select program to modify
Press SHUTTLE PLUS rt, then press OK
or
SHUTTLE PLUS e.
● You can only select one of the
overlapping programs.
● If you do not mind this overlap, press
PROG. to finish the timer program
setting. The program starting earlier or program with the lower
program number will be recorded.
B Cancel or change program setting
To cancel a program, press CANCEL when
the Program screen you do not want is
shown.
To change a program, press the
appropriate button: START+/–, STOP+/–,
DATE+/–, CH+/–, DAILY (Number key
“8”), WEEKLY (Number key “9”) and/or SP/EP when the Program
screen on which you want to make changes is shown, then press
OK or
SHUTTLE PLUS e.
● If the overlap is not yet solved, the conflicting programs will be
shown on the Program check screen. Repeat the above steps
again.
Timer warning display
A warning appears on the TV screen to tell
you that the timer-recording is to start in
5 minutes if you are not in the timer
recording standby mode at that time. Press
TIMER to put the VCR into timer recording
standby mode. To clear the display, press CANCEL on the Remote.
Checking tape position
When you change the VCR operation
mode from the stop mode to fast forward
or rewind mode, or when you perform an
Index Search (
੬ pg. 11) or Instant Review
(
੬ pg. 11), the tape position indicator
appears.
The position of “
q
” in relation to “B” (Beginning) or “E” (End)
shows you where you are on the tape.
● Set “ON SCREEN (REC) and ON SCREEN (PLAY)” to “ON”
(
੬ pg. 18).
Changing display information
When you press
DISPLAY
, the display panel shows the different
patterns of information according to “REC/STOP” or “PLAY”.
* during stop, recording or recording pause only.
When “ON SCREEN (REC) and ON SCREEN (PLAY)” is set to
“ON” (
੬ pg. 18) and OSD (OK) on the Remote is pressed, time
counter and tape remaining time will appear on the TV screen. To
reset the time counter, press C.RESET on the Remote.
Function settings
You can use the other useful function settings on the Function Set
screen.
A
Access Main Menu screen, then
Function Set screen
Press MENU on the Remote. Press
SHUTTLE PLUS rt to move the
highlight bar (arrow) to “FUNCTION SET”,
then press OK or
SHUTTLE PLUS e.
B Select Function
Press SHUTTLE PLUS rt to move the highlight bar (arrow) to
the function you want to set.
C
Change setting
Press OK or SHUTTLE PLUS e. The default setting is bold in the
table below. Press MENU to return to normal screen.
PRESS (CHECK) TO NEXT
PR START STOP CH DATE
1 8:00P 10:00 12 12/24
2 10:00A 10:45 40 12/25
3 11:30P 1:00 125 12/25
4
5
6
7
8
( , ) THEN ( ) (PROG.) : END
PR START STOP CH DATE
1 8:00A 10:00 3 DAILY
2 10:00A 10:45 2 12/25
3 11:30A 13:00 1 12/25
4 9:00A 10:00 92 12/26
5
6
7
8
PROGRAM NOT COMPLETED
PROGRAM OVERLAP
( , ) THEN ( ) (PROG.) : END
PR START STOP CH DATE
1 8:00P 10:00 12 12/24
2 10:00A 10:45 40 12/25
3 11:30P 1:00 125 12/25
4 9:00P 10:00 10 12/24
5
6
7
8
PROGRAM 4
START STOP
9:00PM 10:00PM
DATE CH
12/24/04 10 SP
FRI
PRESS (CANCEL) TO CANCEL
PRESS (OK) TO CONFIRM
PRESS (PROG.) TO END
Other Functions
–WARNING–
TIMER RECORDING
TO START SOON
(CANCEL)
B
+++ E
REMAIN 1:00
COUNT – 1:23:45
Time Counter Tape Remaining Time
Clock Time Channel No.*
MAIN MENU
FUNCTION SET
TUNER SET
INITIAL SET
PRESS ( , ), THEN (OK)
PRESS (MENU) TO END
PREVIOUS PAGE
FRONT AUX INPUT VIDEO
REAR AUX INPUT VIDEO
S-VHS ET OFF
REC END RETURN OFF
DAY/TIME INSERT OFF
REC SAFETY ON
DAILY T.RECORD NORM
SELECT WITH ( , ) AND (OK)
PRESS (MENU) TO END
PREVIOUS PAGE
AUTO SP EP TIMER OFF
DIGITAL R3 ON
VIDEO STABILIZER OFF
2ND AUDIO RECORD OFF
AUDIO MONITOR HI-FI
S-VHS MODE ON
NEXT PAGE
SELECT WITH ( , ) AND (OK)
PRESS (MENU) TO END
SELECT WITH ( , ) AND (OK)
PRESS (MENU) TO END
FUNCTION
DIGITAL TBC/NR
ON
VIDEO CALIBRATION ON
PICTURE CONTROL AUTO
AUTO TIMER OFF
ON SCREEN (REC) ON
ON SCREEN (PLAY) ON
NEXT PAGE
CONTINUED ON NEXT PAGE
SR-V101US.fm Page 17 Friday, December 26, 2003 2:24 PM