Filter
Top Products
Getting started
12
Getting
started
English
Français
XV-M565BK/XV-M567GD [UB, US, 3U, 4U, UX] EN
LVT0521 -013A
Connections
*In the following description, “TV” may be substituted with “monitor” or “projector.”
*Before using the unit, you have to connect the unit to a TV and/or amplifier.
Before making any connections
• Do not connect the AC power cord until all other connections have been made.
• Since different components often have different terminal names, carefully read the instructions supplied with the
component you are going to connect.
To connect to a TV
You can enjoy using the unit by simply connecting it to a TV. To improve audio sound quality, connect the audio
outputs to your separate audio equipment. (See the following pages.)
Getting started
Connect the unit to a TV equipped with stereo audio input and video input jacks using the supplied audio/video
cables.
• If your TV has a monaural audio input instead of stereo, you need to use an optional audio cable which converts
stereo audio output to monaural.
• If your TV has an S-video input, you should connect it with the S-VIDEO output of the unit using the supplied S-
video cable in addition to the (standard) video connection to get better picture quality.
Set the ATTENUATOR switch to OFF normally. If you hear audio sound distorted because the sensitivity of the audio
input of your TV is too high, set the switch to ON.
The unit is compatible with the PAL and NTSC color systems. Set the VIDEO OUT SELECT switch on the rear panel to
match the color system of your TV. Make sure that the color system of the DVD/Video CD/SVCD disc labeled on the
package matches your TV.
If you use a multi-system TV, you can play discs recorded on both PAL and NTSC systems.
OFF ON
AUDIO OUT
ATTENUATOR
L
R
VIDEO S-VIDEO
Y P
B
P
R
COMPONENT
AV COMPU LINK
NTSC PAL
VIDEO OUT
SELECT
VIDEO OUT
OPTICAL
PCM / STREAM
COAXIAL
DIGITAL OUT
VIDEO
AUDIO
RIGHT
LEFT
S-VIDEO
IN
Audio/video cable
(supplied)
S-video cable
(supplied)
The unit
TV
White
Red
Yellow
Red
White
Yellow
*If the TV has an AV COMPU LINK terminal,
you can use the AV COMPU LINK function.
See “AV COMPU LINK remote control system”
on page 49 for details.
• Connect VIDEO OUT of the unit directly to the video input of your TV. Connecting VIDEO OUT of the unit to a TV via a VCR may
cause a monitor problem when playing back a copy-protected disc.
NOTE
EN12-16.XV-M565BK[U....]/3 7/4/00, 3:44 PM12