Filter
Top Products
8
NOTES
• When shipped from the factory, the DIGITAL IN terminals have been set for use with the
following components:
– DIGITAL 1 (coaxial): For DVD player
– DIGITAL 2 (optical): For STB (Set Top Box)
– DIGITAL 3 (optical): For TV tuner
If you connect other components, change the digital input (DIGITAL IN) terminal setting
correctly. See “Setting the digital input (DIGITAL IN) terminals—DIGITAL IN” on page 19.
• Select the correct digital input mode.
See “Selecting the analogue or digital input mode” on page 11.
Connecting other video components
Digital optical cord (not supplied)
Digital coaxial cord
(supplied: 1 cable)
CAUTION:
If you connect a sound-enhancing device such as a graphic equalizer
between the source components and this receiver, the sound output
through this receiver may be distorted.
Digital connection
Getting started
Connecting the DVD player (XV-N55SL)
Connect the DVD player by using a SCART cable
and/or a digital cord.
• To enjoy the digital sound, digital connection is
required—Digital optical connection or Digital
coaxial connection.
NOTES
• When shipped from the factory, the DIGITAL IN
terminals have been set for use with the following
components:
– DIGITAL 1 (coaxial): For DVD player
– DIGITAL 2 (optical): For STB (Set Top Box)
– DIGITAL 3 (optical): For TV tuner
If you connect other components, change the
digital input (DIGITAL IN) terminal setting correctly.
See “Setting the digital input (DIGITAL IN)
terminals—DIGITAL IN” on page 19.
• Select the correct digital input mode.
See “Selecting the analogue or digital input mode”
on page 11.
COAXIAL
AM LOOP
ANTENNA
DVD
IN
AUDIO
L
R
L
R
FM 75
AM EXT
CENTER
FRONT
AV IN / OUT
AV IN
SUBWOOFER
OUT
DIGITAL IN
DIGITAL 3
(TV)
DIGITAL 2
(STB)
DIGITAL 1
(DVD)
CENTER
SPEAKER
SURROUND
SPEAKERS
RIGHT LEFT RIGHT LEFT
FRONT
SPEAKERS
SUB
WOOFER
SURR
(REAR)
CAUTION:
SPEAKER
IMPEDANCE
8
~
16
DVD
VCR TV
STB
VIDEOLEFT
PCM
/
STREAM
COAXIAL
OPTICAL
RIGHT
S-VIDEO
AV OUT
VIDEO OUTDIGITAL OUTAUDIO OUT
VIDEO SIGNAL
SELECTOR
AV COMPU LINK
RX-ES1SL
XV-N55SL
RGB
/
COMP.
Y
/
C
DIGITAL IN
DIGITAL 3
(TV)
DIGITAL 2
(STB)
DIGITAL 1
(DVD)
AV IN
DVD
STB
PCM
/
STREAM
COAXIAL
OPTICAL
DIGITAL OUT
AV OUT
Digital
coaxial cord
(supplied: 1
cable)
Digital
optical cord
(not supplied)
SCART
cable
(supplied:
1 cable)
Before connecting an
optical digital cord,
unplug the protective
plug.
VCR AV IN /OUT
AV IN
SUBWOOFER
OUT
DIGITAL IN
DIGITAL 3
(TV)
DIGITAL 2
(STB)
DIGITAL 1
(DVD)
CENTER
SPEAKER
SURROUND
SPEAKERS
RIGHT LEFT RIGHT LEFT
FRONT
SPEAKERS
DVD
CAUTION:
SPEAKER
IMPEDANCE
8
~
16
TV
STB
OPTICAL
DIGITAL OUT
COAXIAL
DIGITAL OUT
STB (Set Top Box)
TV
DIGITAL IN
DIGITAL 3
(TV)
DIGITAL 2
(STB)
DIGITAL 1
(DVD)
RX-ES1SL
Before connecting
an optical digital
cord, unplug the
protective plug.
Turn off all components before making connections.
• Illustrations of the input/output terminals are typical examples.
When you connect other components, refer also to their manuals
since the terminal names actually printed on the rear vary among
different components.
Set the VIDEO SIGNAL SELECTOR
correctly according to your TV.
• If your TV only accomodates the
composite video signal, set the
VIDEO SIGNAL SELECTOR to
“RGB/COMP.”
• If your TV only accomodates the Y/C
signal, set the selector to “Y/C,” so that
you can enjoy better-quality picture.
• If your TV accomodates the RGB signal,
set the VIDEO SIGNAL SELECTOR to
“RGB/COMP.”
VIDEO SIGNAL
SELECTOR
RGB
/
COMP.
Y
/
C
01-10.RX-ES1&XV-N55[B]f 03.2.18, 1:47 PM8