JVC XV-N55SL DVD Player User Manual


 
20
Setting Auto SurroundAUTO SR
You can enjoy Surround mode simply by selecting the source (with
digital input selected for that source).
Select ON when activating Auto Surround.
ON: If multi-channel signal comes in, an appropriate
Surround mode will be turned on.
If Dolby Digital 2 channel or DTS 2 channel signal
including surround signal comes in, PL II MOVIE will
be selected.
If Dolby Digital 2 channel or DTS 2 channel signal not
including surround signal comes in, STEREO will be
selected.
If Linear PCM signal comes in, nothing will change.
The AUTO SR indicator lights up on the display.
OFF*: Select this to deactivate Auto Surround.
* Initial setting
NOTES
This function does not take effect in the following cases:
While playing an analogue source, and
While selecting DGTL D.D. or DGTL DTS as the fixed digital
input mode (see page 12).
If Surround mode is automatically activated by Auto Surround, any
other Surround mode in use will be canceled temporarily. When the
multi-channel digital signal stops coming in, PL II MOVIE
activates.
If you press SURROUND with Auto Surround activated, Auto
Surround will be canceled temporarily for the currently selected
source.
Auto Surround setting will be restored in the following cases:
When you turn the receiver off and on,
When you change the source,
When you change the analogue/digital input, and
When you reset AUTO SR to ON again.
Setting the Auto Function modeMODE
The video components can be operated through this receiver by
activating Auto Function mode.
This function takes effect for the following sourcesDVD (except
DVD MULTI), STB, and VCR, when they are connected using
SCART cables.
AUTO1: When a video component is turned on while the receiver
is on, the receiver selects the video component as the
source automatically.
The AUTO MODE indicator lights up on the display.
AUTO2: When a video component is turned on while the
receiver is on or TV Direct activates, the receiver
selects the video component as the source
automatically.
When a video component is turned on while the
receiver is off, TV Direct activates and the receiver
selects the video component as the source
automatically.
When a video component currently selected as the
source is turned off while the receiver is on or TV
Direct activates, the receiver changes the source to the
previously selected one.
When all video components are turned off while the
receiver is on or TV Direct activates, the receiver is
turned off automatically.
The AUTO MODE indicator lights up on the display.
MANUAL*: Select the source manually.
* Initial setting
NOTE
When selecting VCR as the source, AUTO1 or AUTO2 may not
work if you only turn on the VCR. If this happens, you may need to
start playback to activate Auto Function mode.
Basic settings
15-20.RX-ES1&XV-N55[B]f 03.2.18, 1:47 PM20