Filter
Top Products
Changing the initial settings
38
XV-NA70BK/XV-NA77SL/GNT0036-001A/English
C
h
a
n
g
i
n
g
t
h
e
i
n
i
t
i
a
l
s
e
t
t
i
n
g
s
MP3&WMA/JPEG
The unit can play MP3/WMA and JPEG files recorded on a CD-
R/CD-RW disc. However, if a disc contains both MP3/WMA and
JPEG files, you can only play files of the type selected in this
menu item.
Setting options
MP3&WMA, JPEG
[MP3&WMA]: when selected, only MP3/WMA files can be played
back.
[JPEG]: when selected, only JPEG files can be played back.
AUDIO menu
DIGITAL AUDIO OUTPUT
To connect the unit’s digital output to an external device equipped
with a digital input, this item must be set correctly.
See “Appendix C: Digital output signal chart” on page 50 for
details about the relation between the setting and output signals.
Setting options
PCM ONLY, DOLBY DIGITAL/PCM, STREAM/PCM
[PCM ONLY]: select when you connect the DIGITAL OUT jack of
the unit to the linear PCM digital input of other audio equipment.
[DOLBY DIGITAL/PCM]: select when you connect the digital
input of a Dolby Digital decoder or an amplifier with a built-in
Dolby Digital decoder.
When this option is selected, playing back a DTS-encoded disc
or disc recorded by the MPEG Multichannel format outputs a
linear PCM digital signal.
[STREAM/PCM]: select when you connect the digital input of an
amplifier with a built-in DTS, MPEG Multichannel or Dolby
Digital decoder, or the stand-alone unit of such a decoder.
NOTE
When [STREAM/PCM] is selected, note the following points:
- With some DVD VIDEO discs that are not fully copy-protected,
a 20 or 24 bit digital signal may be output.
- A signal recorded with the 96 kHz or higher sampling
frequency is output from the DIGITAL OUT jack with the 48
kHz sampling frequency.
- When playing a DVD VIDEO or Audio CD disc with DTS, use
a DTS decoder to get correct signals from your speakers.
ANALOG OUT
To play back a DVD VIDEO disc recorded with surround
multichannel audio correctly, you must set this item properly
according to your audio system.
(This function does not work when the 3D PHONIC function is
activated.)
Setting options
2-CH DOLBY SURROUND, 2-CH STEREO, MULTI CHANNEL
[2-CH DOLBY SURROUND]: select when you enjoy
multichannel surround audio by connecting the unit’s AUDIO
OUT jacks to a surround decoder.
[2-CH STEREO]: select when you enjoy conventional 2-channel
stereo audio by connecting the unit’s AUDIO OUT jacks to a
stereo amplifier/receiver or TV, or when you duplicate audio of a
DVD VIDEO disc recorded with surround audio to your MD,
cassette, etc.
[MULTI CHANNEL]: select when you enjoy multichannel
surround audio by connecting the unit’s 5.1-channel audio
outputs to an amplifier equipped with 5.1-channel inputs.
NOTE
With some DVD AUDIO discs, the track is prohibited from down-
mixing to 2-channel stereo audio. With such discs, even if you
select [2-CH DOLBY SURROUND] or [2-CH STEREO], down-
mixing function does not work. In this case, [MULTI CH] appears
on the display window for about 2 to 3 seconds.
D. RANGE CONTROL
This setting provides optimal audio quality from the analog
AUDIO OUT terminals for listening to DVD VIDEO discs recorded
in Dolby Digital format, at low or middle volume.
Setting options
WIDE RANGE, NORMAL, TV MODE
[WIDE RANGE]: when selected, audio is played back with the
widest dynamic range so that you can enjoy powerful playback
sound.
[NORMAL]: normally, select this option.
[TV MODE]: select if DVD VIDEO disc sound level is lower than
TV program sound level. Thus you can hear sound at a lower
volume clearly.
OUTPUT LEVEL
This setting allows you to attenuate the level of the signal output
from the unit’s analog AUDIO OUT jacks.
Setting options
STANDARD, LOW
• If the sound output from the speaker is distorted, select [LOW].
SPK.SETTING menu
This menu can be selected only when [ANALOG OUT] in the
[AUDIO] preference display is set to [MULTI CHANNEL].
MODE
You can select the speaker configuration type according to your
speaker systems.
Setting options
5.1 CH., EXPERT
[5.1 CH.]: select when you connect the unit to a 5.1-channel
amplifier and use the front, surround, center and sub-woofer
speakers.
[EXPERT]: select when you want to make fine tuning to match
your speakers. The SIZE, DELAY, and LEVEL setting items are
available.
SIZE
You can set the speaker sizes according to your speakers.
See page 40 for how to set the speaker sizes.
DELAY
You can set the speaker delay time according to your speakers.
See page 41 for how to set the speaker delay time.
LEVEL
You can set the speaker output level according to your speakers.
See page 41 for how to set the speaker output level.
NOTE
If you connect the unit’s digital output to an external Dolby Digital
or DTS decoder, and set [DIGITAL AUDIO OUTPUT] in the
[AUDIO] preference display to [STREAM/PCM], the above
settings are not effective.
Make the speaker settings of the external decoder properly.
XV-N70BK_N77SL(JUJ).book Page 38 Wednesday, July 9, 2003 5:36 PM