Filter
Top Products
62
Setting and adjustment
XV-D701BK [C] EN
LET0141-002A
3 Speaker level (available only when selecting EXPERT)
You can adjust the output level of each
speaker.
1 Select [LEVEL] using , then press
ENTER
.
The color of "LEVEL" changes.
2 Select the desired speaker(s) to be set
using
.
• F.SP: front speakers. the level
is fixed to 0db.
• C.SP: center speaker
• R.SP: rear speakers
• S.WOOFER: sub-woofer
The setting range is -6 db to +6 db in 1 db units.
3 Set the level using
.
SPK.SETTING
EXPERT
LEVEL
DELAY
TEST TONE
F. SP
0db
C. SP
0db
R. SP
0db
0db
S.WOOFER
PREFERENCE2PREFERENCE1
PRESS KEY
BASS
4 Delay (available only when selecting EXPERT)
You can adjust the delay time of each
speakers.
1 Select [DELAY] using , then press
ENTER
.
The color of "DELAY" changes.
2 Select the desired speaker(s) to be set
using
.
• F.SP: front speakers. the delay is fixed
to 0ms.
• C.SP: center speaker (selectable from 0 to -5 mS in 1 mS units)
• R.SP: rear speakers (selectable from 0 mS, -5mS, -10 mS, and -15 mS)
3 Set the delay time using
.
SPK.SETTING
EXPERT
LEVEL
DELAY
TEST TONE
F. SP
0mS
C. SP
0mS
R. SP
0mS
0mS
S.WOOFER
PREFERENCE2PREFERENCE1
PRESS KEY
BASS
NOTES
¶ To exit the speaker level (or delay) setting mode
Move
to [LEVEL] (or [DELAY]) in the on-screen display and press
ENTER
until [LEVEL] (or [DELAY]) returns to its original color.
For the speaker(s) whose size is set
to “None”, Speaker level and Delay
cannot be set (“——” appears in the
setting field).
However, when playing back a
Dolby Digital disc, LFE singal is
output from SUBWOOFER output
even if S. WOOFER shows “——”,
allowing to activate a sub-woofer
connected. In such case, adjust the
output level using the level control
on the sub-woofer.
Delay of S.WOOFER cannot be set.