JVC LPT0319-001A VCR User Manual


 
33
Digital 3R
Digital 3R picture system applies edge correction to the luminance
signal to enhance detail.
ACCESS MAIN MENU
SCREEN
1
Press MENU.
ACCESS MODE SET
SCREEN
2
Move the highlight bar
(arrow) to "MODE SET" by
pressing %fi, then press
OK or
#
.
SELECT DIGITAL 3R SET
MODE
3
Move the highlight bar
(arrow) to "DIGITAL 3R"
by pressing %fi, then press
OK or
#
to set to "ON".
RETURN TO NORMAL
SCREEN
4
Press MENU.
NOTES:
Normally it is recommendable to keep "DIGITAL 3R" set to "ON".
Depending on the type of tape being used, picture quality
may sometimes be better with "DIGITAL 3R" set to "OFF".
If you use the recorder as the source player for editing, be
sure to set "DIGITAL 3R" to "OFF" before starting.
MAIN MENU
MODE SET
AUTO CH SET
MANUAL CH SET
OUTPUT/INPUT SET
INITIAL SET
REC LEVEL CTLT
VIDEO NAVIGATION
[
5
] =
[MENU] : EXIT
MODE SET
B. E. S. T. ON
PICTURE CONTROL AUTO
AUTO TIMER OFF
O. S. D. ON
DIRECT REC ON
AUTO SP=LP TIMER OFF
DIGITAL 3R ON
NEXT PAGE
[5∞] =
[MENU] : EXIT
Video Stabilizer
You can automatically correct vertical vibrations in the picture
when playing back unstable recordings made on another
recorder.
* The default setting is "OFF".
ACCESS MAIN MENU
SCREEN
1
Press MENU.
ACCESS MODE SET
SCREEN
2
Move the highlight bar (arrow) to "MODE SET" by
pressing %fi, then press OK or
#
.
SELECT VIDEO STABILIZER
SET MODE
3
Move the highlight bar (arrow) to "VIDEO STABILIZER"
by pressing %fi, then press OK or
#
to set to "ON".
RETURN TO NORMAL
SCREEN
4
Press MENU.
NOTES:
When you finish viewing a tape, be sure to set this function to
"OFF".
Regardless of the setting, this function has no effect during
recording and during special effects playback.
The on-screen display may jitter vertically when this function
is set to "ON".
To watch recordings with close-caption, set this function to
"OFF".
Video Stabilizer and Digital TBC/NR cannot be used at the
same time. If you activate Digital TBC/NR when "VIDEO
STABILIZER" is set to "ON", Video Stabilizer will be automati-
cally turned "OFF".
MODE SET
B. E. S. T. ON
PICTURE CONTROL AUTO
AUTO TIMER OFF
O. S. D. ON
DIRECT REC ON
AUTO SP=LP TIMER OFF
DIGITAL 3R ON
NEXT PAGE
[5∞] =
[MENU] : EXIT
PREVIOUS PAGE
POWER SAVE OFF
VIDEO STABILIZER ON
S-VHS ON
[5∞] =
[MENU] : EXIT