Filter
Top Products
40
PAUSE
TELEC.
AUDIO
OUT
SORTIE
OUT
SORTIE
S
AV1 (L-1)
AV2 (L-2)
IN/OUT
ENTREE/SORTIE
IN/DECODER
ENTREE/DECODEUR
SYNCHRO EDIT
MONTAGE SYNCHRO
SAT CONTROL
CONTROLEUR SAT
JLIP
ANT. IN
ANTENNE
ENTREE
ANTENNE
SORTIE
RF OUT
This facility allows you to record automatically a satellite programme which is timer-programmed on your external satellite receiver.
Connect a satellite receiver to the recorder's AV2 (L-2) IN/DECODER connector and programme the timer on the satellite receiver;
the recorder starts recording when the signals input from the satellite receiver to the AV2 (L-2) IN/DECODER connector, and when
there is no input signals the recorder stops recording and the power shuts off.
Automatic Satellite
Programme Recording
NOTE:
Refer to the instructions supplied with your satellite receiver.
Mains outlet
TV Aerial cable
Aerial
connector
Satellite Receiver Unit
Satellite Cable
Outdoor Unit
Aerial
Back of TV
21-pin AV input
connector (SCART)
RF OUT
ANT. IN
Back of Recorder
ADVANCED OPERATIONS (cont.)
IMPORTANT
When you set "L-2 SELECT" to "SAT" (੬ pg. 50), it is possible to view a satellite broadcast with the TV set to its AV mode even if
the recorder is turned off. When the recorder is in Stop mode or recording, press TV/VCR on the remote control to turn off the
VCR indicator on the display panel.
● If you turn on the recorder when the satellite receiver's power is off, nothing appears on the TV screen. In this case, turn on
the satellite receiver, or set the TV to its TV mode, or press TV/VCR on the remote control to set the recorder to the video
mode.
S-VIDEO IN
connector
AUDIO IN
connector
S OUT