Filter
Top Products
Filename [XVS20AG_07S-VHS.fm]
Masterpage:Left+
34
EN
Page 34 April 9, 2003 10:50 am
OPERATIONS ON S-VHS DECK (cont.)
Express Timer
Programming
If you do not know the G-
CODE
number for the programme you
wish to record, use the following procedure to set your unit to
timer-record the programme.
Example: To timer-record the programme from 21:00 to
22:00 on 25th December, on channel 1.
A
Select the S-VHS deck.
On the unit
Press
S-VHS/DVD
repeatedly so that the S-VHS indicator
lights up.
On the remote control
Press
S-VHS
so that the S-VHS indicator lights up.
B
Access the G-
CODE
/S
HOW
V
IEW
screen.
Press
PROG
.
C
Access the Programme screen.
D
Enter the programme start time.
E
Enter the programme stop time.
Press
STOP +/–
to enter the time you want recording to
stop.
●
Press and hold
STOP +/–
to move in 30-minute increments, or
press and release repeatedly to move 1 minute at a time.
F
Enter the programme date.
Press
DATE +/–
.
●
The current date appears on the TV screen. The date you enter
appears in its place.
Before performing Express Timer Programming:
●
Make sure that the unit’s built-in clock is set properly.
●
Insert a cassette with the safety tab in place. The unit will
come on automatically.
●
Turn on the TV and select the video channel (or AV mode).
●
Slide the
TV/S-VHS/DVD
switch to the right.
Press
START +/–
. (If you’re
just starting out, “P1”
appears.)
Press
START +/–
to enter the
time you want recording to
start.
●
Press and hold
START +/–
to
move in 30-minute
increments, or press and
release repeatedly to move 1
minute at a time.
[+/–]
[PROG] : EXIT
– P1 –
START STOP
– –:– –– –:– –
SP
DATE TV PROG
– –.– – – –
[+/–]
[PROG] : EXIT
– P1 –
START STOP
21:00 – –:– –
SP
DATE TV PROG
– –.– – – –
XVS20AG_01.book Page 34 Wednesday, April 9, 2003 10:53 AM