Filter
Top Products
Masterpage:Right-No-Heading
EN
35
Filename [XVS20AG_07S-VHS.fm]
Page 35 April 9, 2003 5:30 pm
G
Enter the channel position.
H
Set the tape speed.
Press
SP/LP/EP
(
p
).
● Select the appropriate colour system with “PAL/MESECAM”
and “NTSC”. (
੬
pg. 77, 78)
I
Return to the normal screen.
Press
PROG
or
OK
. “PROGRAM COMPLETED” appears
on the TV screen for about 5 seconds, then the normal
screen appears. If “PROGRAM OVERLAPPED” appears
on the TV screen, see page 38.
● Repeat steps
B
–
I
for each additional programme.
J
Engage the unit’s timer mode.
Press
#
(
TIMER
). The unit turns off automatically and
“
#
” appears on the front display panel.
● To disengage the timer mode, press
#
(
TIMER
) again.
To Timer-Record Weekly Or Daily Serials:
— anytime during steps
D
through
H
, press
WEEKLY
(
number
key “9”
) for weekly serials or
DAILY
(
number key “8”
) for daily
serials (Monday – Friday). Either “WEEKLY” or “DAILY” appears
on the TV screen. Pressing the button again makes the
corresponding indication disappear.
NOTE:
You can programme this unit to timer-record as many as 8
programmes. If you try to programme the unit to record a ninth,
“PROGRAM FULL” appears on the TV screen. To record the
extra programme, you must first cancel any unnecessary
programmes. (
੬
pg. 37)
Press
PR +/–
.
[+/–]
[PROG] : EXIT
– P1 –
START STOP
21:00 22:00
SP
DATE TV PROG
25.12 1
Satellite Receiver Users
To timer-record a satellite broadcast using Express Timer
Programming:
A Perform steps
A
–
J
. Enter “L-1” for the channel position
in step
G
.
B Set the satellite receiver to the appropriate channel before
the selected programme begins.
C Leave the satellite receiver’s power on.
XVS20AG_07S-VHS.fm Page 35 Wednesday, April 9, 2003 5:31 PM