Filter
Top Products
Filename [XVS20AG_09Editing.fm]
Masterpage:Left0
68
EN
Page 68 April 9, 2003 6:18 pm
EDITING (S-VHS DECK)
Edit From A
Camcorder
You can use a camcorder as the source player and your
unit as the recording deck.
A
Make connections.
A
If the camcorder has no S-VIDEO output connector:
— connect the camcorder’s AUDIO OUT and VIDEO
OUT connectors to the unit’s front panel AUDIO and
VIDEO input connectors.
B
If the camcorder has an S-VIDEO output connector:
— connect the camcorder’s AUDIO OUT and
S-VIDEO OUT connectors to the unit’s front panel
AUDIO and S-VIDEO input connectors.
●
When using a monaural camcorder, connect its AUDIO OUT
connector to the AUDIO L input connector on your unit.
●
When a Master Edit Control-equipped JVC camcorder is used, the
camcorder is capable of controlling the unit. Refer to the camcorder’s
instruction manual for operating procedure.
B
Select the S-VHS deck.
On the unit
Press
S-VHS/DVD
repeatedly so that the S-VHS indicator
lights up.
On the remote control
Press
S-VHS
so that the S-VHS indicator lights up.
C
Set the unit’s input mode.
Press
AUX
(
number key “0”
) and/or
PR
to select “F-1” for
the AUDIO and VIDEO input connectors, or “S-1” for the
AUDIO and S-VIDEO input connectors, depending on
the connectors being used.
D
Set the edit mode.
See “PICTURE CONTROL” on page 77.
E
Start the camcorder.
Engage the Play mode of the camcorder.
F
Start the unit.
Engage the Record mode of the unit.
NOTES:
●
All necessary cables can be obtained from your dealer.
●
When you select “EDIT” to dub tapes in step
D
, be sure to select
“AUTO” (or “NORM” when “B.E.S.T.” is set to “OFF”) after you finish
dubbing the tapes.
A
If the camcorder has no S-VIDEO output connector:
B
If the camcorder has an S-VIDEO output connector:
Recorder
AUDIO OUT
VIDEO OUT
Camcorder
AUDIO input
Player
VIDEO
input
Video cable (not provided)
Recorder
Audio cable (not provided)
S-VIDEO OUT
AUDIO OUT
Camcorder
S-VIDEO input
Player
AUDIO input
S-Video cable (not provided)
Audio cable (not provided)
EDIT
Mini-plug cable
(not provided)
(JVC camcorder
only)
To PAUSE
connector
Mini-plug cable
(not provided)
(JVC camcorder
only)
To PAUSE
connector
EDIT
Slide the
TV/S-VHS/DVD
switch to the right.
IMPORTANT
●
To edit, both the player and the recorder must be of the same
colour system. Select the appropriate colour system. (
੬
pg. 77,
78)
●
PAL, SECAM and NTSC camcorders can be used as a player for
editing.
●
For more information on multi-system compatibility, refer to
“Information on Multi-System Compatibility (S-VHS deck only)”
(
੬
pg. 88)
XVS20AG_09Editing.fm Page 68 Wednesday, April 9, 2003 6:18 PM