Filter
Top Products
advanced features46
The VCR needs to find, identify and memorise all available stations in your area in order to
record programmes correctly. Once done, pressing the
PR
or
PR
buttons enables you to
jump to the available channels without going via any vacant channels. This channel search
can be done either automatically or manually. You should only need to perform either of the
following procedures if Auto Setup has failed to identify and record available channels or
you have moved to a new area.
Auto Channel Setup
get to the main menu Press .
perform auto channel set Move the highlight bar to AUTO CH
SET
using the
PR
and
PR
buttons and press (or E) twice.
rf and scart connection If you have chosen to connect the
VCR to the TV with both the RF Cable and a 21-pin SCART Cable
(not provided) and the TV set is in its AV mode (see the TV
manual), the
AUTO SET screen will appear on the TV and remains
there for about 4–12 minutes while the VCR searches for receivable
stations. During Auto Channel Set the
S
mark on the screen moves
from left to right.
The caption
SCAN COMPLETED appears at the end of the process for
about 5 seconds.
confirmation screen Once
Auto Channel Set has completed
its search, the confirmation screen will appear showing the details
(
PR = Preset Number, CH = Channel Number and ID = Station
Name) of the TV stations that the process has found. The first
station will have a highlight bar over it and will be blinking. This
screen and the programme currently being broadcast on the
selected station will alternate at 8second intervals. To view the
next channel, press the
PR
and
PR
buttons to move the
highlight bar to the required channel.
return to normal screen Press .
NOTES ON CHANNEL RECEPTION
incorrect station id In certain reception conditions, station names may not be stored
correctly by the VCR and Auto Guide Program Number Set may not work properly. If the Guide
Program Numbers are not set, entering a PlusCode number, may result in an incorrect channel
being recorded.
poor reception The VCR memorises all stations found regardless of their quality. If a station’s
quality is poor, you can delete that station from the memory (see page 47).
Tuner Set
AUTO SET
PLEASE WAIT
[MENU]:EXIT
PR
01
02
03
04
05
06
07
CH
26
33
23
30
37
[10]
a k: EDIT
a [x]: DELETE
[MENU]: EXIT
ID
BBC1
BBC2
ITV
CH4
CH5
- - - -
- - - -
PR
08
09
10
11
12
13
14
CH ID
- - - -
- - - -
- - - -
- - - -
- - - -
- - - -
- - - -
[1] a k
[MENU]: EXIT
MAIN MENU
MODE SET
AUTO CH SET
MANUAL CH SET
OUTPUT/INPUT SET
INITIAL SET
F
HR-S5965/5966EK-EN/p46-51 4/7/03, 03:34 PM46