Filter
Top Products
basic features24
before you start
Make sure that the
VCR’s clock is set
correctly
Insert a cassette with
the safety tab in place
Turn on the TV and
select the Video channel
or the AV Mode
Express Timer
Programming
If you do not know the PlusCode number for the programme that you wish to
record, follow the instructions below to manually set your VCR to record.
Get to the Timer Programming Set Screen
Press p. You will see the following TV screen
information.
Get to the Programme Screen
Press 1 to place the pointer (highlighted bar) next to “EXPRESS
PROGRAMING”, then press OK or ..
Enter Programme Details
set start time Use the START + / – buttons
(number keys
1 and/or 4) to enter the start time.
set stop time Use the STOP + / – buttons
(number keys
2 and/or 5) to enter the stop time.
set date Use the DATE + / – buttons (number
keys
3 and/or 6) to adjust the date (current date
will automatically appear).
set programme Use the PR + / – buttons to enter
the programme required.
set tape speed You can change the tape speed between Standard Play (SP)
and Long Play (LP) by pressing /.
– –:– –
AUDIO
0000
VPS/PDC
3
5
3
24
30 SEC
?
PR
PR
PR
ENTER
LP00000-000
VCR/TV
i
VPS/PDC
VPS/PDC
3
3
PR
PR
[1] a k
[PROG]: EXIT
VIDEO PLUS+
EXPRESS PROGRAMING
F
– P1 –
[+/–] a k
[PROG]: EXIT
START STOP
SP VPS/PDC OFF
DATE TV PROG
21:00
- -:- -
- -.- -
- -
a
HR-S5965/5966EK-EN/p21-26 4/7/03, 04:15 PM24