Filter
Top Products
- 17 -
Use this settings to adjust volume for audio
out terminal which is located at the right side
of the TV.
Using
or button select Audio Out.
Press or button or directly press
OK button on Audio Out, to enter the Audio
Out menu.
Audio Out Volume
As you enter the Audio Out sound menu, Vol-
ume will be the only option.
Press
button to increase volume.
Press
button to decrease volume.
Selecting Sound Mode
Using
or button select Sound Mode.
Press
or button to change Sound Mode.
You can choose Mono, Stereo or Dual
(I-II) mode, only if the selected channel sup-
ports that mode.
You can also change sound mode directly
pressing I-II button on your remote control.
In case of bilingual broadcast (Dual Sound),
you can select original or dubbed language
using mode option.So when somebody lis-
tens to the original language from the loud-
speakers, somebody else can listen to the
dubbed language from headphone.
To Store The Settings
In the Sound Menu, all settings are stored
automatically.
Feature Menu
Press "MENU" button, now you are in
mainmenu. In the main menu, select Feature
using
or button. Then enter the Fea-
ture menu pressing / or OK button.
Sleep Timer
The Sleep Timer is used to turn the TV off after
a defined period of time after selecting this
item. The timer can be programmed between
Off and 120 minutes in steps of 10 minutes.
(Off, 010, 020, 030, 040, ... , 120)
If sleep timer is activated, at the end of the
selected the time, the TV goes automatically
to stand-by mode.
Child Lock
You can use this feature to prevent children
turning on/off TV or changing programmes or
adjustments etc. without remote control.
Using
or button select Child Lock.
Press / button to select Child Lock
On or Off .
The Child Lock feature can be set On or Off by
/ button. When Off is selected, there
will be no difference in the operation of your
TV. When On is selected, the TV can only be
controlled by the remote control handset. In
this case the control panel buttons except "
"
button on the right side of the TV will not work.
Selecting Menu Language
Using
or button select Language.
Press or button to select menu lan-
guage.
EXT-2 Output
From EXT-2 Output; TV, EXT-1 or EXT-4 can be
given. These modes can be chosen by press-
ing or button on "EXT-2 OUTPUT".
Blue Back (During No Signal)
The Blue Back Feature can be set by
or
button to either On or Off
JVC LT-17C88SJ-50058783.p65 15.02.2005, 13:4817