Filter
Top Products
ENGLISH - 10 -
Preparation
Install Display on solid horizontal surface such
as a table or desk.
For ventilation, leave a space of at least 10 cm
free all around the set. To prevent any fault
and unsafe situations, please do not place
any objects on top of the set.
Features
It is a remote controlled colour television and
PC monitor.
100 programmes from VHF, UHF bands or
cable channels can be preset.
It can tune cable channels.
Controlling the TV is very easy by its menu
driven system.
It has 2 pieces of Euroconnector socket for
external devices (such as video, video
games, audio set, etc.)
To use as a PC monitor, 15 Pin Mini D-Sub
connector for computer.
Optional stereo sound systems (German or
German+Nicam) are available.
Multilanguage OSD.
Teletext (Fastext, 7 pages).
It is possible to connect headphone.
A.P.S. (Automatic programming system)
All programmes can be named.
Forward or backward automatic tuning.
Sleep timer.
Child lock
Auto, Full, Regular, Panoramic, 14:9 Zoom,
16:9 Zoom,16:9 Zoom Subtitle modes.
Automatic sound mute when no transmis-
sion.
When no valid signal is detected, after 5 min-
utes the TV switches itself automatically to
stand-by mode.
NTSC Playback.
Universal power supply range is a standard
feature on this model.
TV Picture in PC (if PC input available).
PLL (Channel Search)
PC input (Support Up to 1360x 768)
Panel Features
High resolution, 20-inch TFT LCD display.
High contrast ratio (
800:1 Typical)
Brightness:
450 cd/m
2.
High-speed response time < 25 msec.
Wide viewing angle (typical) 170° (horizon-
tal) and 170° (vertical).
8-bit colour depth, display 16.7 M colours.
Before Switching on your TV
Power connection
Only use the adaptor supplied with this prod-
uct.
IMPORTANT: The TV set is designed to oper-
ate on 24 V DC. For this, an adaptor is used
which gives 24 V DC voltage. Connect this
adaptor to a system that supplies 100 -240V
AC, 50 Hz.
After unpacking, allow the TV set to reach the
ambient room temperature before you con-
nect the set to the mains.
Connections to the RF input
socket
Connect the aerial or cable TV plug to the RF
input socket located at the back of the TV
and connect the cable plug coming out from
LT_20A60_SU.p65 31.08.2005, 08:1710