Filter
Top Products
ENGLISH - 14 -
Programme Selection (Previous or next
programme)
Press
button to select the previous
programme.
Press
button to select the next
programme.
Programme Selection (direct access):
Press digit buttons on the remote control hand-
set to select programmes between 0 and 9.
TV will switch to the selected programme. To
select programmes between 10 - 99, press
the digit buttons consecutively which
programme you want to select (eg. for
programme 27, first press 2 and then 7). When
it is late to press second digit button only the
first digit programme will be displayed. The
limit of the delay time is 3 seconds.
Example: P 6 press 6, P 12 press 1 and
2.
Press directly the programme number to
reselect single digit programmes.
Hint: The channel list numbers are assigned by the broad-
casters. Because not all channels are broadcast free-to-air
and stored by the receiver, the channel list numbers do not
run continuously. The fifteenth channel in the list, for ex-
ample, may not be channel number 15 but channel number
17.
Menu System
Your TV has been designed with a menu sys-
tem to provide an easy manipulation of a multi-
function system. The TV is controlled by choos-
ing the commands, which are displayed on
the screen.
MAIN MENU
Press the "MENU" button. The main menu will
be displayed in the middle of the screen.
To select a sub-menu use or but-
ton, and press or button or directly
press OK button.
In EXT-1, EXT-2 and EXT-4 modes, main menu
appears the same as in TV mode but without
Program sub-menu.
In EXT-3 mode, Main Menu appears as fol-
lows:
Menu does not disappear automatically if it is
left on the screen.
Press MENU button again to remove menu.
Picture Menu
Press "MENU" button, now you are in main
menu. In the Main menu, select Picture
using
or button, then enter the Pic-
ture menu pressing
/ or OK but-
ton.
Setting Mode
As you enter the picture menu, Mode will be
the first item.
LT_20A60_SU.p65 31.08.2005, 08:1714