Filter
Top Products
- 20 -
Timers (DTV Timer Recording)
By setting the timer, you can record a Digital
terrestrial broadcasting (DVB-T) programme
with a VCR connected to Ext-2 while you are
out.
Before using DTV timer recording, the VCR
and TV must be connected correctly. For
details, see TV-LINK on page 15.
When you have a T-V LINK compatible VCR
connected to Ext-2, all you need to do is set
the TV timer settings and the programme
will be recorded.
By using Direct Rec of the T-V LINK func-
tion, the Direct Rec commands are sent
from the TV to the VCR to automatically start
and end the recording. It is not necessary to
set the timer on the VCR.
When your VCR is not T-V LINK compatible,
you also need to set the VCR timer settings
to match the TV timer settings.
The recording may not start and stop at ex-
actly the right times for some programmes.
It is recommended that you allow some lee-
way when setting the recording times.
Provided that the days and times are not the
same, you can set up to ten timer settings.
When subtitles are ON, the subtitles dis-
played with the broadcast will be recorded.
When you do not want to record the sub-
titles, you need to turn OFF the subtitles set-
tings beforehand ( See Displaying the sub-
titles on Page19).
During DTV timer recording, you are unable
to view the DTV menu.
1. Choose Timers and press the OK
button.
The REC TIMER menu appears.
When the BACK button is pressed, the previ-
ous screen is returned to.
2. Press
/ buttons to choose
the timer number, and then press the OK
button.
The timer setting window appears.
3. Use the / buttons, number
buttons and OK button to set the timer.
When setting the start time and end time, in-
put 1200 for 12:00 PM, 1500 for 3:00 PM
and 0000 for 12:00 AM.
Name:
Use the / buttons to choose the
channel for which the timer is to be set.
Press the button.
Start:
Set the timer start time with the number but-
tons.
When the
/ buttons are pressed, the
ENG-IDTV-JVC-1724W-17 INCH TFT LCD.230205.p65 24.02.2005, 08:1920