Filter
Top Products
- 28 -
Setting Sharpness
Using or button select Sharpness.
Press button to increase sharpness
level.
Press button to decrease sharpness
level.
Setting Colour
Using
or button select Colour.
Press
button to increase colour level.
Press button to decrease colour level.
Setting Bright-2 (Only for 17D50BK)
Using or button select Bright-2.
Press button to increase the back light.
Press button to decrease the back light.
Setting Colour Temp.
Using or button select Colour
Temp.
Press or button to select Warm,
Cool or Normal.
Setting Noise Reduction
Using
or button select Noise Re-
duction.
Press
or button to select Noise Re-
duction level Off or Minimum or Me-
dium or Maximum.
Note 1:
At low signal level, the changings on the Noise Reduction
function are not effective when there is menu on the
screen. If the menu is removed, the effect of this function
is seen. At normal broadcasting, Noise Reduction
changings are effective at once.
Note 2:
At moving pictures, while Noise Reduction is at maximum
level, some picture distortions may occur. If Noise Reduc-
tion is set to medium or minimum, the picture will improve.
Setting Hue
During Playback NTSC system, this will ap-
pear in AV mode only when NTSC video
source is applied. Otherwise, HUE option is
invisible in Picture menu in TV mode :
Using
or button select Hue.
Press button to increase hue level.
Press button to decrease hue level.
Center value is indicated with one arrow.
Reset
Press BLUE button to reset the picture
modes to factory default settings.
To Store the Settings
In the Picture Menu, all settings are stored
automatically.
ENG-IDTV-JVC-1724W-17 INCH TFT LCD.230205.p65 24.02.2005, 08:1928