Filter
Top Products
26
Adjusting tracking condition
Special playback
Reverse picture search function
Picture Search
Press REW x 1 or x 2 during the playback.
Forward picture search function
Press FF x 1 or x 2 during the playback.
To return to playback: Press PLAY.
Still Picture
Press PAUSE during playback. To resume normal
playback: Press PLAY.
Slow Motion
Whenever you insert a tape and start playback,
automatic tracking starts working and continuously
analyzes the signal to enable optimum picture quality
during playback.
During playback press SLOW.
To return to playback: Press PLAY or SLOW.
Press PAUSE during playback.
Press SLOW one by one: The picture advances frame
by frame.
To return to playback: Press PLAY or PAUSE.
Frame by Frame picture
Notes:
•
The audio output is muted during SPEED SEARCH,
STILL, FRAME ADVANCE and SLOW MOTION.
• During picture search mode there will be noise bars
which are caused by the system.
• The Special Playback will automatically change to
playback after approx. 5 minutes to protect the video
tape against excessive wear.
Slow tracking and vertical lock adjustment
If noise bars appear in the picture during slow motion,
press the SET + or – to reduce the noise bars.
If the still picture jitters excessively, press SET + or –
to stabilize the still picture.
Automatic tracking adjustment
If automatic tracking cannot eliminate noises well during
playback, press SET +/– to eliminate the noises.
“MANUAL TR.” will appear. Press it briefly for a fine
adjustment, or press and hold for a coarse adjustment.
Manual tracking adjustment
Repeat playback
The entire video tape will be played until its end.The
tape will then automatically rewind to the beginning and
the playback will be repeated.
1
Press SETUP MENU. Press or to select
AUTO REPEAT.
3
Press SETUP MENU until the menu screen is
cleared.
if you press OSD, " " will appear on the screen.
Then press ENTER
to
select [ON] or [OFF].
If [ON] is selected, the
playback will be
repeated endlessly.
4
To start the playback, press PLAY.
The playback will be repeated endlessly.
2
To cancel repeat mode:
Follow the above step 1, then press ENTER to select
the OFF position. Press SETUP MENU to return to
the TV.
Press A.TRK to reactivate automatic tracking again.
“AUTO TR.” will appear.
•
Skip Search
Each time you press SKIP SEARCH while a tape is
playing, the unit will fast-forward ahead 30 seconds
on the tape. You may press the button up to six times
in a row to move 180 seconds (three minutes) ahead.
1 press: 30 seconds of tape
2 presses: 60 seconds of tape
3 presses: 90 seconds of tape
For example:
+/-/ENTER/MENU
MENU
TIMER REC SET
AUTO REPEAT
ON OFF
ON OFF
SAP
CH SET UP
SYSTEM SET UP
2B00501AE(22-27) 1/7/2002, 10:1926