JVC RM-C1450 Flat Panel Television User Manual


 
39
Initial Setup
This function automatically shuts off your TV when there is no signal from the channel and no
operation if the TV is on for 10 minutes.
Press the MENU button
π
To "Initial Setup"
®
To enter
π
To "Auto Shut Off"
®
To turn "On" or "Off"
Press the MENU button when finished
• If the channel that you have on does not receive a
signal for more than one minute, the blinking text “No
Program or Weak Signal Auto shut off in 9 min.” appears on the screen, and starts the
countdown. If no signal is being received within 10 minutes, the TV shuts itself off.
Auto Shut Off
BACK
Back
MENU
ExitSelect Operate
Initial Setup
2/2
Auto Shut Off
Software Version
Power Indicator
Optical Out
Quick Start-up
Off
High
PCM
Off
You can confirm the Software Version.
Press the MENU button
π
To "Initial Setup"
®
To enter
π
To "Software Version"
®
To enter
Press the OK button to close
Press the M
ENU button when finished
Software Version
Initial Setup
2/2
Auto Shut Off
Software Version
Power Indicator
Optical Out
Quick Start-up
Off
High
PCM
Off
BACK
Back
MENU
ExitSelect Operate
OK
Power indicator allows you to adjust the brightness of the power indicator.
Press the MENU button
π
To "Initial Setup"
®
To enter
π
To "Power Indicator"
®
To turn "High", "Low" or "Off"
Press the MENU button when finished
Notes :
• When Off is selected :
The LED disappears if you have a TV signal.
The LED is lit as “Low” when there is no TV signal.
• When the On Timer turns On, the LED is lit as "Low" when you turn the power off.
• If you set a timer on the TV, the power indicator will light even if the TV is on stand by.
Power Indicator
Initial Setup
2/2
Auto Shut Off
Software Version
Power Indicator
Optical Out
Quick Start-up
Off
High
PCM
Off
BACK
Back
MENU
ExitSelect Operate
OK
LCT2275-001B-A English.indd 39LCT2275-001B-A English.indd 39 6/14/07 10:34:15 AM6/14/07 10:34:15 AM