JVC RX-774RBK VCR User Manual


 
32
English
Searching for a Program by PTY Codes
One of the advantages of the RDS service is that you can locate a particular kind of
program from the preset channels by specifying the PTY codes.
To search for a program using the PTY codes
On the front panel:
1. Press PTY SEARCH while listening to an FM
station.
“PTY SELECT” flashes on the display.
2. Turn MULTI JOG until the PTY code you want
appears on the display, while “PTY SELECT” is
flashing.
As you turn it, the display gives you the PTY codes
described on page 33.
3. Press PTY SEARCH again, while the PTY code
selected in the previous step is still on the display.
While searching, “SEARCH” and the selected PTY
code alternate on the display.
The receiver searches 40 preset channels, stops when it
finds the one you have selected, and tunes in that
station.
To continue searching after the first stop
Press PTY SEARCH again while the indications on the display are flashing.
If no program is found, “NOTFOUND” appears on the display.
To stop searching any time during the process
Press PTY SEARCH while searching.
MULTI JOG
PTY SEARCH
PTY SEARCH
Note:
FM stations must be preset to
use the PTY search.
EN20_51.RX-774R[E]/1 98.3.31, 2:04 PM32