Filter
Top Products
16
AUDIOTV
SLEEPDIMMER
DVD FM/AM
TV CH
AUX
TV/VIDEO
MUTING
CONTROL
TEST TONE
TOP
MENU
MENU
CHOICE/TIME
DOWN - TUNING - UP
AUDIO
SLOW RETURN PL
PROGRESSIVE
RM-STHA25J
DVD THEATER SYSTEM
SUBTITLE ANGLE ZOOM
ON SCREEN
TV VOL
AUDIO VOL
1234
5678
9
TV
0
MEMORY
CANCEL
ENTER
SOUND
/
REPEAT
FM MODE
STEP
2
Start playback on the external component.
• For in-depth information about the external component, see
the manual supplied with it.
Notes:
• When “DIGITAL IN” is selected as the source and the Dolby Digital
or DTS multi-channel signal is detected, Multichannel Surround is
activated automatically.
For in-depth information about Multichannel Surround, see
“Surround Mode Introduction” on page 19.
• You can enjoy Dolby Pro Logic II mode when you playback any 2-
channel sources, either digital or analog.
For in-depth information about Dolby Pro Logic II modes, see
“Surround Mode Introduction” on page 19.
Turning Off the Power with the Timer
You can fall asleep while listening to music—Sleep Timer.
From the remote control ONLY:
Press SLEEP.
“SLEEP” and the shut-off time appear on the display.
• Each time you press the button, the shut-off time changes
as follows:
When the shut-off time comes, the system turns off automatically.
To check or change the time remaining until the
shut-off time
Press SLEEP once.
The remaining time (in minutes) appears on the display.
• By pressing SLEEP, you can change the shut-off time.
To cancel the Sleep Timer
Press SLEEP repeatedly until “OFF” appears on the
display.
• Turning off the power also cancels the Sleep Timer.
Adjusting the Display Brightness
You can dim the display.
From the remote control ONLY:
Press DIMMER.
• Each time you press the button, the brightness level of the
display changes as follows:
Other Basic Operations
10 20 30 60
150 120 90
OFF
(Canceled)
Enjoying Sounds from the External
Component
You can enjoy sounds from the external components connected to
the AUDIO IN jacks and the DIGITAL IN terminal on the rear panel
of the center unit.
1
Select AUX or DIGITAL IN as the source.
From the remote control:
Press AUX.
• Each time you press the button, the source changes as
follows:
On the front panel:
Press SOURCE repeatedly until “DIGITAL IN” or
“AUX” appears on the display.
DIGITAL IN: select this to enjoy the external component
connected to DIGITAL IN terminal.
AUX: select this to enjoy the external component
connected to AUDIO IN jacks.
AUX
SLEEP
Dim
Dimmer
Canceled
(Normal Display)
AUX
SOURCE
SLEEP
SLEEP
SLEEP
DIMMER
DIMMER
AUX
DIGITAL IN
DVD/CD DIGITAL IN
FMAM
AUX
12_16_TH_A25[J].p65 03.8.31, 2:09 PM16