JVC SR- DVM600U DVR User Manual


 
Filename [DVM600US_11Editing.fm]
Masterpage:Left+
52 EN
EDITING
Page 52 Monday, 25 September 2006 13:54
You can use your unit as the source player or as the recording
deck.
1 Make connections.
A When using your unit as the source player:
^ connect its [S-VIDEO/VIDEO/AUDIO OUTPUT] connectors
to the input connectors on another recorder.
B When using your unit as the recording deck:
^ connect its [S-VIDEO/VIDEO/AUDIO INPUT] connectors on
the front or rear panel to the output connectors on another
recorder.
When connecting to another recorder with S-video connector,
set AREAR AUX L-1B or AFRONT AUX F-1B to AS-VIDEOB.
2 Press INPUT SELECT +/– on the remote control or
INPUT SELECT on the unit to select the external input.
Select AF-1B when the source player is connected to the unit’s
[VIDEO/AUDIO] or [S-VIDEO/AUDIO] input connectors on the
front panel, and select AL-1B when it is connected to the unit’s
[VIDEO/AUDIO] or [S-VIDEO/AUDIO] input connectors on the
rear panel.
3 Press REC MODE repeatedly to set the recording mode.
4 Engage the Play mode on the source player.
5 Engage the Record mode on the recording deck.
6 Stop recording on the recording deck, then stop playback on the
source player.
NOTES:
All necessary cables can be obtained from your dealer.
When you use this unit as the source player for editing, be sure to
set ASUPERIMPOSEB to AOFFB before starting. (A pg. 59)
Edit To Or From Another Recorder
NOTES:
When using another recorder as the recording deck, refer to its
instruction manual.
It is not possible to dub copy-protected contents. An error
message will appear on the TV screen.
A When using your unit as the source player
B When using your unit as the recording deck
Recorder
Your unit
Another recorder
Player
TV
Player
Your unit
Another recorder
Recorder
TV
Slide the TV/DVD switch to DVD.
DVM600US_00.book Page 52 Monday, September 25, 2006 1:54 PM