JVC MV45U DVD VCR Combo User Manual


 
Masterpage:Right+
EN 49
Filename [SR-MV45_55U_10Editing.fm]
Page 49 January 10, 2007 1:18 pm
EDITING
Dubbing A Part Of A Disc
You can dub the selected scenes on a DVD disc to the tape,
starting and stopping wherever you wish.
1 Load a disc you want to dub on the DVD deck, and a cassette
with the record safety tab intact on the VCR deck.
2 Press VCR}DVD to select the dubbing direction. The dubbing
(DUBB.) lamp lights up on the unit.
3 Prepare the DVD deck for dubbing.
A Press VCR/DVD repeatedly so that the DVD lamp lights up on
the unit.
B Locate the point from where you want to start dubbing, then
pause playback by pressing the following buttons: 4, 5, 3,
8, 9
4 Prepare the VCR deck for dubbing.
A Press VCR/DVD repeatedly so that the VCR lamp lights up on
the unit.
B Press REC MODE repeatedly to set the recording mode.
(pg. 36)
C Press 7 and 9 simultaneously so that the VCR deck enters the
Record Pause mode.
5 Press and hold DUBB. for more than 2 seconds to start the
dubbing. The dubbing (DUBB.) lamp blinks on the unit.
6 Press 8 to stop recording on the VCR deck. Then press VCR/
DVD, and press 8 to stop playback on the DVD deck.
Press VCR}DVD to turn off the dubbing (DUBB.) lamp.
NOTES:
It is not possible to start dubbing if the unit retains a memory of the
resume points. Press 8 twice to clear the resume points.
There may be a discrepancy of several seconds between where you
intend dubbing to start, and where it actually starts.
If you do not want the superimposed indication to be recorded, set
“SUPERIMPOSE” to “OFF” before dubbing. (pg. 59)
When the end of the tape is reached during dubbing, the tape is
ejected and both deck stops.
When the progressive mode is set, the dubbing (DUBB.) lamp does
not light up on the front display panel. Press PROGRESSIVE SCAN
so that video output indicator ( ) lights off on the front display panel.
It is not possible to perform other operations like Live Memory
Playback. Check the recorded program on the disc after dubbing.
Manual Dubbing (From DVD To VCR)
Turn on the unit.
Turn on the TV and select the AV mode.
Slide the TV/CABLE/DBS/DVD switch to DVD.
1
4
7
2
5
8
0
3
6
9
8
5
3
4
7
9
REC MODE
PROGRESSIVE SCAN
VCR/DVD
8
VCR } DVD
DUBB.
7
3
VCR/DVD
REC
MODE
U
5
9
DUBB. Lamp
SR-MV45_55US.book Page 49 Wednesday, January 10, 2007 1:18 PM