Filter
Top Products
Filename [SR-MV45_55U_11Subsidiary.fm]
Masterpage:Left+
60 EN
Page 60 January 10, 2007 1:18 pm
SUBSIDIARY SETTINGS
You can change various mode settings on the Function Set screen.
To change the settings of these modes, find the desired mode in
the menu (for details on each menu, see pages 60 through 61),
then follow the procedure below.
1 Press VCR/DVD repeatedly so that the VCR lamp lights up on
the unit.
2 Press SET UP to access the Main Menu screen.
3 Press rt to select “COPY SET” or
“FUNCTION SET”, then press ENTER.
4 Press rt to select the item you want to change, then press
ENTER or e to select the desired mode.
5 Press SET UP to complete the setting.
*The boldface settings below indicate the settings at your purchase.
COPY SET
8 COPY MODE — FULL COPY / 1 PROG.
This function allows you to select the position to stop dubbing
when performing manual dubbing from the VCR deck to DVD deck.
(੬ pg. 47)
FULL COPY: Dubbing stops at the end of tape.
1 PROG.: Dubbing stops when an index code or unrecorded
portion is detected.
8 FULL DISC — ON / OFF
You can activate Just Dubbing function when dubbing an entire
cassette from the VCR deck to DVD deck by setting this function to
“ON”. The unit automatically calculates the total recording time of
the cassette and sets the appropriate recording mode depending
on the calculated time and the available disc space. (੬ pg. 46)
8 AUTO FINALIZE — ON / OFF
When this function is set to “ON”, the unit will automatically finalize
the disc when dubbing has been completed. (੬ pg. 46)
FUNCTION SET
8 S-VHS ET — ON / OFF
You can record in SP mode on VHS cassettes with S-VHS picture
quality. You can play back a tape recorded using the S-VHS ET
function on most of the S-VHS recorders and VHS recorders
equipped with SQPB (S-VHS QUASI PLAYBACK) function. (Notice
some recorders are not compatible with the S-VHS ET function.)
When this function is set to “ON”, the S-VHS indicator lights up on
the front display panel.
NOTES:
● You can activate the S-VHS ET function only before you start
recording on a VHS cassette.
● Before recording, make sure that “VIDEO CALIBRATION” is set to
“ON”. (੬ below)
● You cannot activate the S-VHS ET function:
— while recording is in progress.
— while Video Calibration (੬ pg. 38) is in progress.
● The S-VHS ET function does not work with S-VHS cassettes.
● To keep the highest quality recording and playback pictures over a
long period of time, S-VHS recording on S-VHS cassettes is
recommended.
● Use of high grade tapes is recommended for S-VHS ET recordings.
On some tapes, picture quality will not improve even if the S-VHS ET
function is used. Check the recording quality before you start
important recordings.
● While playing back a tape recorded using the S-VHS ET function on
some recorders, noise may appear. (If playback picture becomes
blurred or interrupted, use a cleaning cassette.)
● In the variable speed search, still, slow-motion or frame-by-frame
playback modes (੬ pg. 34, “Playback Features”), noise may appear.
If these modes are performed frequently on a tape recorded using
the S-VHS ET function, the tape may be damaged and the picture
may be deteriorated.
8 VIDEO CALIBRATION — ON / OFF
When this function is set to “ON”, this unit checks the condition of
the tape in use during playback and recording, and compensates
to provide the highest-possible pictures. This takes place whenever
you play back a tape or start recording after inserting a tape.
(੬ pg. 38)
Mode Set (VCR Deck)
● Turn on the unit.
● Turn on the TV and select the AV mode.
● Slide the TV/CABLE/DBS/DVD switch to DVD.
1
4
7
2
5
8
0
3
6
9
ENTER
SET UP
rtw e
VCR/DVD
PRESS ( , ), THEN (OK)
(SET UP) TO END
COPY SET
FUNCTION SET
MAIN MENU
( , ) THEN (ENTER)
(SET UP) TO END
FUNCTION
S-VHS ET OFF
VIDEO CALIBRATION ON
PICTURE CONTROL AUTO
VIDEO STABILIZER OFF
SUPERIMPOSE AUTO
DIGITAL R3 ON
NEXT PAGE
( , ) THEN (ENTER)
(SET UP) TO END
PREVIOUS PAGE
BLUE BACK OFF
S-VHS MODE ON
RETURN POINT TAPE END
REC SAFETY ON
( , ) THEN (ENTER)
(SET UP) TO END
COPY MODE FULL COPY
FULL DISC OFF
AUTO FINALIZE OFF
COPY SET
OR
SR-MV45_55US.book Page 60 Wednesday, January 10, 2007 1:18 PM