Filter
Top Products
EN 67
SUBSIDIARY SETTINGS
You can select a desired background from the 18 original
backgrounds or the backgrounds and/or text colors that you have
created (A pg. 66), and set it as the default background to be used
during finalization (A pg. 46, 64).
Registering Default Background And Text Color
1 Press SET UP to access the Main Menu screen.
2 Press selection keys to select AINITIAL SET UPB, then press
G.
3 Press selection keys to select AMENU BACKGROUNDB, then
press G.
4 Press selection keys to select AREGISTERB, then press
ENTER.
● The background selection screen appears. The current
background selected is indicated by a check mark AB
superimposed on it.
● To return to the previous screen, press RETURN.
5 Press selection keys to select the desired background, then
press ENTER.
● The AB mark is superimposed on the newly selected
background.
● A preview screen of the selected background will be displayed
for approximately 2 seconds.
● The selected background will be used as the default
background for finalization.
6 Press SET UP to return to the normal screen.
NOTE:
When you update the backgrounds/text color or restore the original
backgrounds/text color, the default setting registered in the above
procedures will be cleared.
Previewing the background effect
This unit allows you to preview the effect of the background and/or
text color you have selected before proceeding with finalization.
This preview function is only possible when finalizing a DVD-R/RW
(Video mode) disc.
After selecting a background in step 8 of AFinalize A DVD-R/RW
DiscB (A pg. 64):
A Press selection keys to select APREVIEWB, then press
ENTER.
● A preview screen of the final result of your selected background
will appear.
● To exit the preview screen, press ENTER.
● To preview again, press selection keys to select
ARECONFIRMB, then press ENTER.
B Press selection keys to select AOKB, then press ENTER to
continue with finalization.
C Proceed to perform steps 9 – 11 of AFinalize A DVD-R/RW
DiscB (A pg. 64) to complete finalization.
Setting The Background And Text Color
● Turn on the unit.
● Turn on the TV and select the AV mode.
● Slide the TV/DVD switch to DVD.
FGDE
ENTER
SET UP
RETURN
DVDTV
Selection Keys